matusita> I have similar problem; 'ata' bus is detected twice.
I've just updated to 5-current as of yesterday (yeh!), but no helps.
'ata' driver detects the second devices which is _not_ on this machine.
Attached below is a full and verbose dmesg output. Most part of
kernel configulation is as same as GENERIC, only some unused devices
and options are wiped out. Note again that this machine worked well
with 4-stable kernel.
What's wrong with me? or something goes wrong in 5-current kernel?
-- -
Makoto `MAR' MATSUSHITA
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #1: Thu Jun 21 14:19:43 JST 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/SNAPSHOTS_CURRENT
Calibrating clock(s) ... TSC clock: 501112757 Hz, i8254 clock: 1193126 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 501138091 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 268435456 (262144K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00395000 - 0x0fff7fff, 264646656 bytes (64611 pages)
avail memory = 257662976 (251624K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fad10
bios32: Entry = 0xfb180 (c00fb180) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb1b0
pnpbios: Found PnP BIOS data at 0xc00fbdd0
pnpbios: Entry = f0000:be00 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc036f000.
random: <entropy source>
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Using $PIR table, 8 entries at 0xc00fdd40
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base d2000000, size 22, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000e000, size 5, enabled
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=12
map[90]: type 4, range 32, base 00005000, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
map[10]: type 1, range 32, base d2440000, size 12, enabled
map[14]: type 4, range 32, base 0000e400, size 6, enabled
map[18]: type 1, range 32, base d2420000, size 17, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x09
bus=0, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d2441000, size 12, enabled
map[14]: type 4, range 32, base 0000e800, size 6, enabled
map[18]: type 1, range 32, base d2400000, size 17, enabled
found-> vendor=0x8086, dev=0x1229, revid=0x09
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d1000000, size 24, enabled
found-> vendor=0x102c, dev=0x00c0, revid=0x64
bus=0, slot=11, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: physical bus=1
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000
ata0: mask=03 ostat0=50 ostat2=00
ata0-slave: ATAPI probe 00 00
ata0-master: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 12 at device
7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ukbd0: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 2, iclass
3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums0: Behavior Tech. Computer Keyboard with mouse port, rev 1.00/1.00, addr 2, iclass
3/1
ums0: 3 buttons
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device
7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe400-0xe43f mem
0xd2420000-0xd243ffff,0xd2440000-0xd2440fff irq 15 at device 8.0 on pci0
fxp0: using memory space register mapping
fxp0: could not map interrupt
device_probe_and_attach: fxp0 attach returned 6
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe800-0xe83f mem
0xd2400000-0xd241ffff,0xd2441000-0xd2441fff irq 11 at device 9.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:10:f3:03:52:32, 10Mbps
fxp0: PCI IDs: 8086 1229 0000 0000 0009
fxp0: Chip Type: 0
bpf: fxp0 attached
pci0: <display, VGA> at 11.0 (no driver attached)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 12 devices, largest 69 bytes
PNP0000: adding irq mask 0x4
PNP0000: adding io range 0x20-0x21, size=0x2, align=0
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0
PNP0000: end config
pnpbios: handle 0 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
PNP0200: end config
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
PNP0100: end config
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
PNP0b00: end config
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
PNP0303: end config
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
PNP0800: end config
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
PNP0c04: end config
pnpbios: handle 6 device ID PNP0c04 (040cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xfffe0000-0xffffffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0xfffffff, size=0xff00000
PNP0c01: end config
pnpbios: handle 7 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xfffff, size=0xc000
PNP0c02: adding fixed memory32 range 0xdd800-0xdffff, size=0x2800
PNP0c02: adding fixed memory32 range 0xcc000-0xcffff, size=0x4000
PNP0c02: end config
pnpbios: handle 8 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x480-0x48f, size=0x10, align=0
PNP0a03: adding io range 0x4000-0x403f, size=0x40, align=0
PNP0a03: adding io range 0x5000-0x501f, size=0x20, align=0
PNP0a03: end config
pnpbios: handle 9 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
PNP0501: end config
pnpbios: handle 13 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0
PNP0700: adding irq mask 0x40
PNP0700: end config
pnpbios: handle 14 device ID PNP0700 (0007d041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xd0000-0xdd7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 irq 1 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <PNP0c02> can't assign resources
unknown: <PNP0c02> at iomem
0xf0000-0xf3fff,0xf4000-0xfffff,0xdd800-0xdffff,0xcc000-0xcffff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
BIOS Geometries:
0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ad0: success setting UDMA2 on Intel chip
Creating DISK ad0
ad0: <IBM-DJSA-220/JS4OAC3A> ATA-5 disk at ata0-master
ad0: 19077MB (39070080 sectors), 38760 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 39070079, size 39070017 : OK
start_init: trying /sbin/init
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
