At 11:47 PM +0900 6/18/01, Makoto MATSUSHITA wrote:
>(from dmesg output)
>atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device
>7.1 on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
This looks right to me. One main PIIX4 ATA controller with two
independent IDE channels (usually referred to as a Primary and a
Secondary IDE controller). Usually the PC BIOS will allow you to turn
on/off these channels independently. Does your bios allow you to turn
off the Secondary?
>I've tried to figure out what's going on with atacontrol(8), and got:
>
>ushi % sudo atacontrol info ata0
>Master slot: ad0: <IBM-DJSA-220/JS4OAC3A> ATA/ATAPI rev 5
>Slave slot: no device present
>ushi % sudo atacontrol info ata1
>Master slot: ad0: <IBM-DJSA-220/JS4OAC3A> ATA/ATAPI rev 5
>Slave slot: no device present
>
>Apparantly, the kernel attaches same bus/HDD _twice_.
I don't think the HDD is being detected twice. Try this instead:
% sudo atacontrol info 0
% sudo atacontrol info 1
Mark
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
