----- Original Message -----
From: "Mike Tancsa" <[EMAIL PROTECTED]>
# dd if=/dev/zero of=/spool/test bs=32k count=20000
20000+0 records in
20000+0 records out
655360000 bytes transferred in 7.587819 secs (86370011 bytes/sec)
Interesting results there that's very similar to what I get here ( have
a 8 port Areca here as well ). Why so interesting? Well the cheapo
hightech smokes it on that very test pushes 180MB/s from a 5 disk
setup. The problem is that's not worth nothing if its not stable :(
Thanks for all the responses guys.
For what its worth this is the error:
[error]
IAL: COMPLETION ERROR, adapter 0, channel 5, flags = 104
ATA regs: error 10, sector count 20, LBA Low ff, LBA mid ff, LBA high ff,
device 4f, status 51
channel 5: perform recalibrate command
hptmv: Retry on channel(5)
...
hptmv: too many retires on channel(5)
hptmv: Device removed: controller 1 channel 5
[/error]
I dont know if its a hardware issue or just a driver bug. I've tried the
latest version 1.12 as well as the built in FreeBSD 1.1 based driver
no joy. Tried 1.13 and 1.16 BIOS no difference always ditches
disk 4 which is odd and why I suspected a duff disk, cable, or port
but all have now been checked :(
Dont know if Scott ( did the original driver port iirc ) or Søren the
resident IDE guru would have any ideas if this is a hardware or a
driver issue.
Regards
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please
telephone (023) 8024 3137
or return the E.mail to [EMAIL PROTECTED]
_______________________________________________
freebsd-performance@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-performance
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
