OOPS! I apologize to everyone on this list for not compressing my
error_log file and wasting your time and bandwidth downloading it.
On Jun 27, 2006, at 7:43 PM, Anthony Agelastos wrote:
On Jun 25, 2006, at 11:37 PM, Nicolas Blais wrote:
On Sunday 25 June 2006 23:32, John Nielsen wrote:
On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:
On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:
On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:
I updated CUPS and I cannot print to my USB laser printer. The
web
interface shows the following:
hp_LaserJet_1160Le (Default Printer) "Unable to open USB device
"usb:/dev/ulpt0": Permission denied"
Description: Hewlett-Packard LaserJet 1160Le
Location: Den
Make and Model: HP LaserJet 1160 Foomatic/hpijs (recommended)
Printer State: stopped, accepting jobs, published.
Device URI: usb:/dev/ulpt0
Doing a `dmesg | grep ulpt0`, I get
ulpt0: Hewlett-Packard hp LaserJet 1160 series, rev 1.10/1.00,
addr 2,
iclass 7/1
ulpt0: using bi-directional mode
The printer itself works (I plugged it directly into my MacBook
and it
printed fine). To ensure it wasn't an awkward build error, I
issued a
`portupgrade -fR cups`
and rebuilt it and everything it is dependent upon. Does anyone
else have
any ideas? I am running an early 6.1-STABLE (FreeBSD dell.home.iq
6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sat May 13 01:04:32 EDT 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/IQKERNEL i386).
Just a "me too" so far with an el cheapo Lexmark USB laser printer
(E210).
Are you using the foomatic script? I am, with a PPD from
linuxprinting.org.
I am not sure, actually (it was so long ago, I do not remember
how I
got it working). I installed hpijs and "Make and Model" mentions
Foomatic/hpijs, so perhaps. I am sorry I could not be of more
assistance with this question.
I'm going to try backing up and blowing away my etc/cups dir, re-
updating
the port, reinstalling foomatic and my ppd, and see if that
makes any
difference. I'll post whatever I learn.
Thank you for posting your findings and for your quick reply.
No luck. I basically re-installed everything (including config
files and
the foomatic filters) from scratch. I also changed the permissions
on /dev/ulpt0 to be 0664 for root:cups. That prevents the
permissions
error, but I still get nothing from the printer. The message that
comes up
in the cups web interface when I try to print a test page is:
"/usr/local/libexec/cups/backend/usb failed"
I did get my other printer (on a different machine) working with
cups 1.2.0
by just changing the permissions on the device node. I hadn't
ever set this
printer up with cups before today, though. It's using gutenprint.
After playing with the permissions on ulpt, I can print a test
page, though
half of it comes out after I manually feed my printer.
After that half-printed page, anything I try to print after will
get me a "USB
port busy; will retry in 30 seconds..." message and it never prints.
My system essentially does the same thing (the 30 second message
that is). After changing my LogLevel and killing and resubmitting
a test page, here is my error_log file. Does anyone else have any
idea what I can try next? Everyone on this list has been wonderful
with this thread. Thanks again.
<error_log>
--
FreeBSD 7.0-CURRENT #4: Sun Jun 25 12:13:31 EDT 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/CLK01A
PGP? : http://www.clkroot.net/security/nb_root.asc
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"