On Jun 25, 2006, at 11:37 PM, Nicolas Blais wrote:
My system essentially does the same thing (the 30 second message that is). After changing my LogLevel and killing and resubmitting a test page, here is my error_log file. Does anyone else have any idea what I can try next? Everyone on this list has been wonderful with this thread. Thanks again.On Sunday 25 June 2006 23:32, John Nielsen wrote:On Sunday 25 June 2006 20:04, Anthony Agelastos wrote:On Jun 25, 2006, at 7:35 PM, John Nielsen wrote:On Sunday 25 June 2006 19:28, Anthony Agelastos wrote:I updated CUPS and I cannot print to my USB laser printer. The web interface shows the following: hp_LaserJet_1160Le (Default Printer) "Unable to open USB device "usb:/dev/ulpt0": Permission denied" Description: Hewlett-Packard LaserJet 1160Le Location: Den Make and Model: HP LaserJet 1160 Foomatic/hpijs (recommended) Printer State: stopped, accepting jobs, published. Device URI: usb:/dev/ulpt0 Doing a `dmesg | grep ulpt0`, I get ulpt0: Hewlett-Packard hp LaserJet 1160 series, rev 1.10/1.00, addr 2, iclass 7/1 ulpt0: using bi-directional mode The printer itself works (I plugged it directly into my MacBook and itprinted fine). To ensure it wasn't an awkward build error, I issued a`portupgrade -fR cups` and rebuilt it and everything it is dependent upon. Does anyone else have any ideas? I am running an early 6.1-STABLE (FreeBSD dell.home.iq 6.1-RELEASE FreeBSD 6.1-RELEASE #0: Sat May 13 01:04:32 EDT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/IQKERNEL i386).Just a "me too" so far with an el cheapo Lexmark USB laser printer (E210). Are you using the foomatic script? I am, with a PPD from linuxprinting.org.I am not sure, actually (it was so long ago, I do not remember how I got it working). I installed hpijs and "Make and Model" mentions Foomatic/hpijs, so perhaps. I am sorry I could not be of more assistance with this question.I'm going to try backing up and blowing away my etc/cups dir, re- updatingthe port, reinstalling foomatic and my ppd, and see if that makes anydifference. I'll post whatever I learn.Thank you for posting your findings and for your quick reply.No luck. I basically re-installed everything (including config files andthe foomatic filters) from scratch. I also changed the permissions on /dev/ulpt0 to be 0664 for root:cups. That prevents the permissionserror, but I still get nothing from the printer. The message that comes upin the cups web interface when I try to print a test page is: "/usr/local/libexec/cups/backend/usb failed"I did get my other printer (on a different machine) working with cups 1.2.0 by just changing the permissions on the device node. I hadn't ever set thisprinter up with cups before today, though. It's using gutenprint.After playing with the permissions on ulpt, I can print a test page, thoughhalf of it comes out after I manually feed my printer.After that half-printed page, anything I try to print after will get me a "USBport busy; will retry in 30 seconds..." message and it never prints.
error_log.bz2
Description: Binary data
-- FreeBSD 7.0-CURRENT #4: Sun Jun 25 12:13:31 EDT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CLK01A PGP? : http://www.clkroot.net/security/nb_root.asc
_______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"