At 08:09 PM 10/5/2006, Karl Denninger wrote:
>
> ugen0: American Power Conversion Smart-UPS 750 FW:651.12.D USB
FW:4.2, rev 1.10/0.06, addr 2
Does apcupsd connect to it? I tried this back on 5.x and it failed
miserably. It identified the unit, but wouldn't talk to it.
I literally have 150+ remote FreeBSD boxes with them and they succeed
fantastically... They are configured to shut down the box and power
to the UPS outlets on power failure with 25% battery left. All the
notification hooks work as expected. They have been working for me
since the 5.x days. I have a few in the field running on 5.4 boxes
(May 2005) without issue. (ugen0: APC Back-UPS ES 725 FW:802.n2.D USB
FW:n2, rev 1.10/1.06, addr 2)
[ps0006]# apcaccess
APC : 001,034,0908
DATE : Thu Oct 05 20:28:56 EDT 2006
HOSTNAME : ps0006.sentex.ca
RELEASE : 3.10.18
VERSION : 3.10.18 (21 July 2005) freebsd
UPSNAME : RAPIDS
CABLE : USB Cable
MODEL : Back-UPS ES 500
UPSMODE : Stand Alone
STARTTIME: Wed Jun 14 11:00:07 EDT 2006
STATUS : ONLINE
LINEV : 120.0 Volts
LOADPCT : 12.0 Percent Load Capacity
BCHARGE : 100.0 Percent
TIMELEFT : 29.9 Minutes
MBATTCHG : 25 Percent
MINTIMEL : -1 Minutes
MAXTIME : 0 Seconds
LOTRANS : 088.0 Volts
HITRANS : 139.0 Volts
ALARMDEL : 30 seconds
BATTV : 13.6 Volts
NUMXFERS : 19
XONBATT : Mon Sep 25 10:53:00 EDT 2006
TONBATT : 0 seconds
CUMONBATT: 173 seconds
XOFFBATT : Mon Sep 25 10:53:02 EDT 2006
STATFLAG : 0x02000008 Status Flag
MANDATE : 2005-10-13
SERIALNO : JB0542018502
BATTDATE : 2000-00-00
NOMBATTV : 12.0
FIRMWARE : 24.B1.D USB FW:B1
APCMODEL : Back-UPS ES 500
END APC : Thu Oct 05 20:28:57 EDT 2006
[ps0006]# usbdevs
addr 1: UHCI root hub, VIA
addr 2: Back-UPS ES 500 FW:824.B1.D USB FW:B1, APC
addr 1: UHCI root hub, VIA
addr 1: UHCI root hub, VIA
addr 1: UHCI root hub, VIA
addr 1: EHCI root hub, VIA
[ps0006]#
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
