I'm on a 486 DX2 66 EISA bus, no VLB. 20 megs of SIMM ram, 30 pin. Is there a copy of memtest86+ for freedos, it would be silly if this turned out to be a bad memory problem.
autoexec.bat: --------------------------------------------------------------------------- @echo off if not "%config%" == "4" SET CTCM=C:\CTCM if not "%config%" == "4" C:\CTCM\CTCU /S SET dosdir=C:\FDOS REM C:\FDOS\BIN\BANNER2 REM C:\FDOS\BIN\BLACKOUT set PATH=%dosdir%\bin;c:\commwp\wp60 set NLSPATH=%dosdir%\NLS set HELPPATH=%dosdir%\HELP set temp=%dosdir%\temp set tmp=%dosdir%\temp SET BLASTER=A220 I2 D1 H5 P330 REM if not "%config%"=="4" c:\fdos\bin\shsucdx.com /D:fdcd0001 REM if not "%config%"=="4" LH VIAUDIO REM if not "%config%"=="4" LH VIAFMTSR REM if not "%config%"=="4" LH FDAPM APMDOS if "%config%"=="2" LH SHARE SET autofile=C:\autoexec.bat alias reboot=fdapm warmboot alias halt=fdapm poweroff SET CFGFILE=C:\fdconfig.sys echo type HELP to get support on commands and navigation echo. echo Welcome to FreeDOS echo. if not "%config%"=="4" mouse if not "%config%"=="4" C:\FDOS\drivers\net\crynwr\ne2000 0x60 12 0x280 SET WATTCP.CFG=%DOSDIR%\BIN lh doslfn set PATH=%PATH%;%DOSDIR%\emacs set PATH=%PATH%;%DOSDIR%\SETEDIT SET VIM=C:\FDOS\VIM SET PATH=%PATH%;%DOSDIR%\vim\vim70 SET PATH=%PATH%;%DOSDIR%\fbc call %DOSDIR%\watcom\setvars.bat SET PATH=%PATH%;%DOSDIR%\PACIFIC\BIN REM if not "%config%"=="4" @SET SCSI_DRIVER = C:\IOMEGA REM if not "%config%"=="4" @SET SCSI_UTILITY = C:\IOMEGA SET PATH=%PATH%;d:\iomega REM BLACKOUT REM MODE CO80 --------------------------------------------------------- fdconfig.sys: --------------------------------------------------------- !COUNTRY=001,437,C:\FDOS\BIN\COUNTRY.SYS !SET lang=EN !LASTDRIVE=F !BUFFERS=40 !FILES=100 !DOS=HIGH,UMB !DOSDATA=UMB !set dircmd=/ogn /4 !MENUCOLOR=7,5 MENUDEFAULT=2,5 MENU 1 - Load FreeDOS with EMM386, no EMS (most UMBs), max RAM free MENU 2 - Load FreeDOS with JEMM386+EMS and SHARE MENU 3 - Load FreeDOS including HIMEM XMS-memory driver MENU 4 - Load FreeDOS without drivers DOS=HIGH,UMB REM 123?DEVICE=C:\FDOS\BIN\XCDROM.SYS /D:fdcd0001 123?DEVICE=C:\FDOS\HIMEMX.EXE 1?DEVICE=C:\FDOS\BIN\EMM386.EXE NOEMS X=TEST 2?DEVICE=C:\FDOS\JEMM386.EXE 123?DEVICE=C:\CTCM\CTCM.EXE REM 123?DEVICEHIGH=C:\FDOS\bin\xdma.sys REM 123?INSTALL=C:\FDOS\BIN\BLACKOUT.EXE REM 123?INSTALL=C:\FDOS\BIN\BANNER1.COM 123?DEVICEHIGH=C:\FDOS\BIN\MORESYS.SYS SHELLHIGH=C:\FDOS\bin\command.com C:\FDOS\bin /E:1024 /P=C:\autoexec.bat 4? ------------------------------------------------------------------------- The exact error message for utime is: utime(fdupdate.tab): Input or output error (EIO) At this point a window pops up asking me to update debug. If I press y, the computer crashes. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Freedos-user mailing list Freedos-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/freedos-user
