> On Jul 18, 2016, at 9:02 AM, Dimitris Zilaskos <dimitr...@gmail.com
> <mailto:dimitr...@gmail.com>> wrote:
>
> Hi,
>
> Thanks for the followup. Hitting F8 reveals HIMEMX triggering this problem:
> https://drive.google.com/open?id=0B2zW1ur6Z_WeSWtGNXN0NmxxaU0
> <https://drive.google.com/open?id=0B2zW1ur6Z_WeSWtGNXN0NmxxaU0>
>
> I have observed that the gibberish stops given sufficient time:
> https://drive.google.com/open?id=0B2zW1ur6Z_WeVjVMalF6M2YtMTA
> <https://drive.google.com/open?id=0B2zW1ur6Z_WeVjVMalF6M2YtMTA>
>
> Let me know what else I can try - I will recheck the floppies for starters in
> case they went bad and check the rest of your suggestions.
>
> Best regards,
>
> Dimitris
>
You could just try removing HIMEMX.SYS from the FDCONFIG.SYS file.
Also, remove the DOS=HIGH, DOS=UMB, DOSDATA=UMB.
Change SHELLHIGH to SHELL.
After doing all of that, see what happens.
FDI needs very little memory to run. It only loads stuff HIGH so the boot media
could be used to run other (not included) diagnostic programs and recovery
tools.
Jerome
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev
_______________________________________________
Freedos-user mailing list
Freedos-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freedos-user
