On Thu, 2003-06-19 at 18:57, Yousef Jamous wrote: > As I mentioned in my e-mail, I specified the option to compile with > snmp. Yep, I read it. It seams "--enable-snmp" is equivalent to "--enable-snmp=no". Since it's default, please don't specify it, or do it with "--enable-snmp=yes".
Chris > What can cause not compiling with SNMP though I specified that? > Could it be a bug in the version I'm using (I'm using the latest > version). > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Chris van > Meerendonk > Sent: June 19, 2003 6:12 PM > To: [EMAIL PROTECTED] > Subject: Re: Radius does not try to register with SMUX- REPOSTED > > It looks like your freeradius isn't compiled with snmp support, although > you specified it. The only way of *not* getting the SMUX messages in > debug mode was to compile freeradius again with --enable-snmp=no. > > Please double check that snmp support was compiled. Since it's default, > you dont have to specify the --enable-snmp feature. > > Chris > > > On Wed, 2003-06-18 at 23:06, Yousef Jamous wrote: > > Sorry for the previous posting, it was with some HTML lines. > > I'm trying to use net-snmp V5.0.8 to get information from my > free-radius > > server (V 0.8.1). > > > > I did the following: > > Compiled radius server with --enable-snmp option > > net-snmp was compiled with SMUX option module > > Radius MIBS are accessible by the snmpd > > In the radius snmp.cof file I put: > > smux_password = secretpassword > > snmp_write_access = no > > snmpd.conf contains the line > > smuxpeer .1.3.6.1.4.1.3317.1.3.1 secretpassword > > When I run the command: > > snmpd -f -a -V -L -Dsmux > > smux_init: [smux_init] done; smux listen sd is 8, smux port is 199 > > smux_conf: parsing registration for: 1.3.6.1.4.1.3317.1.3.1 > > secretpassword > > NET-SNMP version 5.0.8 > > > > When I launch radiusd using radiusd -xxx, I see the logs, I do not see > > an entry showing that the radiusd has connected to the SMUX. > > My log file looks something like: > > > > Starting - reading configuration files ... > > reread_config: reading radiusd.conf > > Config: including file: /usr/local/etc/raddb/proxy.conf > > Config: including file: /usr/local/etc/raddb/clients.conf > > Config: including file: /usr/local/etc/raddb/snmp.conf > > Config: including file: /usr/local/etc/raddb/sql.conf > > main: prefix = "/usr/local" > > main: localstatedir = "/usr/local/var" > > main: logdir = "/usr/local/var/log/radius" > > main: libdir = "/usr/local/lib" > > main: radacctdir = "/usr/local/var/log/radius/radacct" > > main: hostname_lookups = no > > main: max_request_time = 30 > > main: cleanup_delay = 5 > > main: max_requests = 1024 > > main: delete_blocked_requests = 0 > > main: port = 0 > > main: allow_core_dumps = no > > main: log_stripped_names = no > > main: log_file = "/usr/local/var/log/radius/radius.log" > > main: log_auth = yes > > main: log_auth_badpass = no > > main: log_auth_goodpass = no > > main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" > > main: user = "(null)" > > main: group = "(null)" > > main: usercollide = no > > main: lower_user = "no" > > main: lower_pass = "no" > > main: nospace_user = "no" > > main: nospace_pass = "no" > > main: checkrad = "/usr/local/sbin/checkrad" > > main: proxy_requests = yes > > proxy: retry_delay = 5 > > proxy: retry_count = 3 > > proxy: synchronous = no > > proxy: default_fallback = yes > > proxy: dead_time = 120 > > proxy: servers_per_realm = 15 > > security: max_attributes = 200 > > security: reject_delay = 1 > > security: status_server = no > > main: debug_level = 0 > > read_config_files: reading dictionary > > read_config_files: reading naslist > > read_config_files: reading clients > > read_config_files: reading realms > > radiusd: entering modules setup > > Module: Library search path is /usr/local/lib > > Module: Loaded expr > > Module: Instantiated expr (expr) > > Module: Loaded PAP > > pap: encryption_scheme = "crypt" > > Module: Instantiated pap (pap) > > Module: Loaded CHAP > > Module: Instantiated chap (chap) > > Module: Loaded MS-CHAP > > mschap: ignore_password = no > > mschap: use_mppe = yes > > mschap: require_encryption = no > > mschap: require_strong = no > > mschap: passwd = "(null)" > > mschap: authtype = "MS-CHAP" > > Module: Instantiated mschap (mschap) > > Module: Loaded System > > unix: cache = no > > unix: passwd = "(null)" > > unix: shadow = "(null)" > > unix: group = "(null)" > > unix: radwtmp = "/usr/local/var/log/radius/radwtmp" > > unix: usegroup = no > > unix: cache_reload = 600 > > Module: Instantiated unix (unix) > > Module: Loaded preprocess > > preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" > > preprocess: hints = "/usr/local/etc/raddb/hints" > > preprocess: with_ascend_hack = no > > preprocess: ascend_channels_per_line = 23 > > preprocess: with_ntdomain_hack = no > > preprocess: with_specialix_jetstream_hack = no > > preprocess: with_cisco_vsa_hack = no > > Module: Instantiated preprocess (preprocess) > > Module: Loaded realm > > realm: format = "suffix" > > realm: delimiter = "@" > > Module: Instantiated realm (suffix) > > Module: Loaded files > > files: usersfile = "/usr/local/etc/raddb/users" > > files: acctusersfile = "/usr/local/etc/raddb/acct_users" > > files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" > > files: compat = "no" > > Module: Instantiated files (files) > > Module: Loaded Acct-Unique-Session-Id > > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > > Client-I= > > P-Address, NAS-Port-Id" > > Module: Instantiated acct_unique (acct_unique) > > Module: Loaded detail > > detail: detailfile = > > "/usr/local/var/log/radius/radacct/%{Client-IP-Addr= > > ess}/detail-%Y%m%d" > > detail: detailperm = 384 > > detail: dirperm = 493 > > detail: locking = no > > Module: Instantiated detail (detail) > > Module: Loaded radutmp > > radutmp: filename = "/usr/local/var/log/radius/radutmp" > > radutmp: username = "%{User-Name}" > > radutmp: perm = 384 > > radutmp: callerid = yes > > Module: Instantiated radutmp (radutmp) > > Initializing the thread pool... > > thread: start_servers = 5 > > thread: max_servers = 32 > > thread: min_spare_servers = 3 > > thread: max_spare_servers = 10 > > thread: max_requests_per_server = 0 > > thread: cleanup_delay = 5 > > Thread spawned new child 1. Total threads in pool: 1 > > Thread 1 waiting to be assigned a request > > Thread 2 waiting to be assigned a request > > Thread spawned new child 2. Total threads in pool: 2 > > Thread spawned new child 3. Total threads in pool: 3 > > Thread 3 waiting to be assigned a request > > Thread spawned new child 4. Total threads in pool: 4 > > Thread 4 waiting to be assigned a request > > Thread 5 waiting to be assigned a request > > Thread spawned new child 5. Total threads in pool: 5 > > Listening on IP address *, ports 1812/udp and 1813/udp, with proxy on > > 1814/= > > udp. > > Ready to process requests. > > > > I saw in archive list some lines like > > > > SMUX connect try 2 > > Can't connect to SNMP agent with SMUX: Connection refused > > --- Walking the entire request list --- > > Waking up in 6 seconds... > > SMUX connect try 3 > > Can't connect to SNMP agent with SMUX: Connection refused > > > > > > Why my radiusd does not try to register?? > > > > I would appreciate very much your help. > > > > > > > > - > > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html