Cool; any hints on configuring Radius itself? Specifically, for talking to LDAP? Thanks!
-- Josh Whitver [EMAIL PROTECTED] / [EMAIL PROTECTED] [EMAIL PROTECTED] writes: >> Hello! Thanks for everyone's help earlier with getting the latest >> FreeRadius up and running on Mac OS X; it's all good now. >> >> My current problem is that I have next to no experience with this >product >> (or any Radius product), and I need to get it talking to a Cisco 3000 >VPN >> concentrator and our Mac OS X Open Directory service (which is basically >> LDAP). >> >> I've been poking through the config files, and think I have a very rough >> idea of what I'm doing, but if anyone could offer any tips, perhaps make >> available some config files for talking to a Cisco 3000 (minus any >> sensitive data, of course)...whatever you folks think would be helpful. >> >> Any help is greatly appreciated! Thanks! > >In the VPN concentrator web interface, go to configuration, system, >servers, authentication. Add the IP address and shared secret of your >radius server. > >Go to user management, groups. Then modify your group. Look for the >IPsec tab and change the Authentication setting to RADIUS. > >That should get your concentrator talking radius for authentication. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html