On Fri, 8 Aug 2003, Josh Whitver wrote:
> Cool; any hints on configuring Radius itself? Specifically, for talking > to LDAP? Thanks! > if you have the source, check out /doc/rlm_ldap > -- > Josh Whitver > [EMAIL PROTECTED] / [EMAIL PROTECTED] > > > [EMAIL PROTECTED] writes: > >> Hello! Thanks for everyone's help earlier with getting the latest > >> FreeRadius up and running on Mac OS X; it's all good now. > >> > >> My current problem is that I have next to no experience with this > >product > >> (or any Radius product), and I need to get it talking to a Cisco 3000 > >VPN > >> concentrator and our Mac OS X Open Directory service (which is basically > >> LDAP). > >> > >> I've been poking through the config files, and think I have a very rough > >> idea of what I'm doing, but if anyone could offer any tips, perhaps make > >> available some config files for talking to a Cisco 3000 (minus any > >> sensitive data, of course)...whatever you folks think would be helpful. > >> > >> Any help is greatly appreciated! Thanks! > > > >In the VPN concentrator web interface, go to configuration, system, > >servers, authentication. Add the IP address and shared secret of your > >radius server. > > > >Go to user management, groups. Then modify your group. Look for the > >IPsec tab and change the Authentication setting to RADIUS. > > > >That should get your concentrator talking radius for authentication. > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
