Found it.... ----- Original Message ----- From: "Bob Ross" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, April 15, 2004 12:39 PM Subject: Re: Migrate over
> I just read through the INSTALL and there is not one thing on the PREFIX. Do > I use it with ./configure, or make. > > Example? > > Thanks > > > ----- Original Message ----- > From: "Dennis Skinner" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Thursday, April 15, 2004 12:15 PM > Subject: Re: Migrate over > > > > On Thu, 2004-04-15 at 14:55, Bob Ross wrote: > > > Is there any documentation on the migration process from Cistron 1.6.6 > to > > > FreeRadius? > > > > > > Slackware 9.1 kernel 2.4.22 > > > > > > I downloaded and extracted FreeRadius 0.93, configured/compiled with no > > > errors. Did not yet do a make install yet because I wanted to make sure. > > > This is a production server and can't risk a major outage. I would like > to > > > have both running until I'm sure all the processes are running as they > > > should be. Like running freeRadius on port 1812/1813. > > > > Use a different PREFIX (e.g. /test) directory when you compile so it > > cannot overwrite any of your existing setup, then you can "make install" > > to your heart's content. Then get your configs all setup for different > > ports and you should not be interfering with the existing cistron. > > > > -- > > Dennis Skinner > > Systems Administrator > > BlueFrog Internet > > http://www.bluefrog.com > > > > > > - > > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > > > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html