You don't have to edit stuff out of the config... it normally just breaks stuff. Just edit your ldap settings, uncomment the ldap authen/authorize, and you should be ready to rock.
-----Original Message----- From: Nathan Blackham [mailto:[EMAIL PROTECTED] Sent: Thursday, August 05, 2004 10:48 AM To: [EMAIL PROTECTED] Subject: Re: PEAP-MSCHAPv2 and LDAP backend I tried putting mschap back into the the authorize section and it still did not work. I had it working against the users file but I want it to authenticate against the LDAP. Nathan On Wed, 2004-08-04 at 18:02, Paul Bender wrote: > Nathan Blackham wrote: > > I am using FreeRadius1.0.0Pre3. > > I am having a problem trying to get my user to authenticate. It seems > > as though everything is working right but the user is not being > > authenticated. The debug shows that the password is the same as the > > ntpassword from the LDAP server but it is not working. Here is a > > portion of the debug log file: > > > > modcall: group authorize returns updated for request 6 > > rad_check_password: Found Auth-Type LDAP > > rad_check_password: Found Auth-Type EAP > > Warning: Found 2 auth-types on request for user 'nhb5' > > auth: type "EAP" > > Processing the authenticate section of radiusd.conf > > modcall: entering group authenticate for request 6 > > rlm_eap: Request found, released from the list > > rlm_eap: EAP/mschapv2 > > rlm_eap: processing type mschapv2 > > ERROR: Unknown value specified for Auth-Type. Cannot perform > > > authenticate { > > eap > > } > > You appear to be missing MS-CHAP as an authentication type. > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html