Thanks for the speedy reply. Below is the relevant info from the debug log (I don't see Filter-ID showing up anywhere but I know for a fact that one is getting set). The users file is just a set of default statements. We then use a mysql table for replying special info such as Filter-IDs.
rad_recv: Accounting-Request packet from host 66.63.192.249:1813, id=185, length =374 User-Name = "jpotte00" NAS-IP-Address = 66.63.192.249 NAS-Identifier = "66.63.192.249" Acct-Status-Type = Start Acct-Session-Id = "16777830" Acct-Delay-Time = 0 Acct-Authentic = RADIUS Service-Type = Framed-User NAS-Port-Type = Async NAS-Port = 257 USR-Modem-Training-Time = 26 USR-Interface-Index = 1513 USR-Chassis-Call-Slot = 2 USR-Chassis-Call-Span = 1 USR-Chassis-Call-Channel = 1 USR-Unauthenticated-Time = 1 Calling-Station-Id = "" Called-Station-Id = "8594160000" USR-PW_VPN_ID = "\000\000\000" USR-Modulation-Type = v34 USR-Simplified-MNP-Levels = v42SRej USR-Simplified-V42bis-Usage = ccittV42bis USR-Connect-Speed = 26400-BPS Framed-Protocol = PPP Framed-IP-Address = 66.63.213.175 USR-MP-MRRU = 1614 USR-MP-EDO-HIPER = "[\327\307\232T\372H\253\255EH\375\034;\266\215\000\000\000" Acct-Link-Count = 1 Acct-Multi-Session-Id = "37f3e" USR-VTS-Session-Key = "\361\331'\322_\222\034\022\036\372\322\004A\347\364h" USR-Call-Arrival-Time = 274135264 --- Alan DeKok <[EMAIL PROTECTED]> wrote: > Josh Potter <[EMAIL PROTECTED]> wrote: > > I have tried the "+=" operator to stack them all > to no > > avail. Always just one of the Filter-IDs > specified is > > used. > > It works for my tests. > > And... what does the debug log say? Are you > willing to post it, and > samples from your "users" file? > > Alan DeKok. > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > __________________________________ Do you Yahoo!? Yahoo! Mail Address AutoComplete - You start. We finish. http://promotions.yahoo.com/new_mail - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html