Thanks for the speedy reply. Below is the relevant
info from the debug log (I don't see Filter-ID showing
up anywhere but I know for a fact that one is getting
set). The users file is just a set of default
statements. We then use a mysql table for replying
special info such as Filter-IDs.
rad_recv: Accounting-Request packet from host
66.63.192.249:1813, id=185, length
=374
User-Name = "jpotte00"
NAS-IP-Address = 66.63.192.249
NAS-Identifier = "66.63.192.249"
Acct-Status-Type = Start
Acct-Session-Id = "16777830"
Acct-Delay-Time = 0
Acct-Authentic = RADIUS
Service-Type = Framed-User
NAS-Port-Type = Async
NAS-Port = 257
USR-Modem-Training-Time = 26
USR-Interface-Index = 1513
USR-Chassis-Call-Slot = 2
USR-Chassis-Call-Span = 1
USR-Chassis-Call-Channel = 1
USR-Unauthenticated-Time = 1
Calling-Station-Id = ""
Called-Station-Id = "8594160000"
USR-PW_VPN_ID = "\000\000\000"
USR-Modulation-Type = v34
USR-Simplified-MNP-Levels = v42SRej
USR-Simplified-V42bis-Usage = ccittV42bis
USR-Connect-Speed = 26400-BPS
Framed-Protocol = PPP
Framed-IP-Address = 66.63.213.175
USR-MP-MRRU = 1614
USR-MP-EDO-HIPER =
"[\327\307\232T\372H\253\255EH\375\034;\266\215\000\000\000"
Acct-Link-Count = 1
Acct-Multi-Session-Id = "37f3e"
USR-VTS-Session-Key =
"\361\331'\322_\222\034\022\036\372\322\004A\347\364h"
USR-Call-Arrival-Time = 274135264
--- Alan DeKok <[EMAIL PROTECTED]> wrote:
> Josh Potter <[EMAIL PROTECTED]> wrote:
> > I have tried the "+=" operator to stack them all
> to no
> > avail. Always just one of the Filter-IDs
> specified is
> > used.
>
> It works for my tests.
>
> And... what does the debug log say? Are you
> willing to post it, and
> samples from your "users" file?
>
> Alan DeKok.
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
_______________________________
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
http://promotions.yahoo.com/goldrush
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
