Hi Jean-Marie,
it's preferable to use the integer values instead of ASCII strings.
So for the switching VLAN, I create a local VLAN on Cisco Aironet with a
speficied SSID. The user configuration questions this SSID and according to
the user, this one is switched in the VLAN defines in configuration file.
If I'm not enough "clear" does not hesitate to say it ;)
Regards,
Lionel.
Lionel Gavage
Network Engineer (SeGI/ULg)
Email: [EMAIL PROTECTED] Tél: +32-4-3664845
Fax: +32-4-3662920
Bat. B26 SeGI
-----Message d'origine-----
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] la part de Lionel
Gavage
Envoyé : jeudi 30 septembre 2004 7:47
À : [EMAIL PROTECTED]
Objet : RE: AP1230 + VLAN assignment
Hi,
It's possible to switch VLAN when the user connecting to Cisco Aironet.
For 802.1x with VLAN switching, three radius attribute-value pairs are
defined.
In the user file for example:
xxx User-Password == "xxx"
Tunnel-Type:1 = 13,
Tunnel-Medium-Type:1 = 6,
Tunnel-Private-Group-ID:1 = 17
So the integer values "13" and "6" are representing "VLAN" and "802" ASCII
strings respectively. The value "17" is the VLAN id to be used
Regards,
Lionel.
Lionel Gavage
Network Engineer (SeGI/ULg)
Bat. B26 SeGI
-----Message d'origine-----
De : [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] la part de Alan
DeKok
Envoyé : mercredi 29 septembre 2004 20:21
À : [EMAIL PROTECTED]
Objet : Re: AP1230 + VLAN assignment
Jean-Marie GUILLEMOT <[EMAIL PROTECTED]> wrote:
> I'm trying to assign wireless users connecting to Cisco Aironet 1230 to
VLAN
> thanks to Freeradius.
I'm not sure that's possible. See the Cisco AP documentation for a
list of what attributes it can understand in an Access-Accept.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
