Ok, now we are getting somewhere, I'm getting the following output: rad_recv: Access-Request packet from host 192.168.2.80:43835, id=102, length=234 User-Name = "[EMAIL PROTECTED]" Digest-Attributes = 0x0a05313031 Digest-Attributes = 0x010e3139322e3136382e322e3830 Digest-Attributes = 0x022a34363939653236343763333537313631373066343236656466366262383661666535633736636466 Digest-Attributes = 0x04127369703a3139322e3136382e322e3830 Digest-Attributes = 0x030a5245474953544552 Digest-Attributes = 0x050661757468 Digest-Attributes = 0x090a3030303134313333 Digest-Attributes = 0x081237633762663032366635646533653537 Digest-Response = "90ea471ad7040bab866ffa15ee80e21d" Service-Type = Authenticate-Only Sip-Uri-User = "101" NAS-Port = 5060 NAS-IP-Address = 192.168.2.80 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 radius_xlat: '/var/log/radius/radacct/192.168.2.80/auth-detail-20070715' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/192.168.2.80/auth-detail-20070715 modcall[authorize]: module "auth_log" returns ok for request 6 perl_pool: item 0x8af4268 asigned new request. Handled so far: 1 found interpetator at address 0x8af4268 perl_pool total/active/spare [32/0/32] Unreserve perl at address 0x8af4268 modcall[authorize]: module "perl" returns ok for request 6 modcall: leaving group authorize (returns ok) for request 6 auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user auth: Failed to validate the user. Login incorrect: [EMAIL PROTECTED]/<no User-Password attribute>] (from client openser port 5060) Delaying request 6 for 1 seconds Finished request 6 Going to the next request Waking up in 2 seconds...
I think I have a section missing from FreeRadius configuration, is that correct? Zap2Link -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, July 17, 2007 12:08 PM To: FreeRadius users mailing list Subject: Re: RLM_PERL integration issue radiusd -X Ivan Kalik Kalik Informatika ISP Dana 17/7/2007, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> piše: >Hi All, > > > > I've followed the rlm_perl information to integrate a PERL based >example for Radius Authentication. > >I basically used the same example that is in the document. I know that >the script is loaded whe FreeRadius is loaded, however, It would seem >that all requests to the Radius server are not processed via rlm_perl. > > > > Is there a way to verify that rlm_perl is invoked? > > > >Zap2Link > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html