Well, right now I would like to start of with something really simple. I'd like
to have OpenSER authenticate
on FreeRadius, Digest is not a must - for all I care at this point, it can be
clear-text. I'm currently using
the perl script example from the FreeRadius website, which if i understand
correctly, should answer OK on any
request to it. That is what I where i want to get to at this point, once that
is working, i can continue onwards.
Z2L
----- Original Message -----
From: [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Sent: 14:06:58 (GMT+0200) Asia/Jerusalem יום שלישי 17 יולי 2007
Subject: Re: RLM_PERL Integration Issue
I don't know what is your pearl script supposed to do. If you are doing
digest authentication (looking at that request) you need to uncomment
the digest entries in authentication and authorization sections od
radiusd.conf.
Ivan Kalik
Kalik Informatika ISP
Dana 17/7/2007, "FreeRadius-ML" <[EMAIL PROTECTED]> piše:
>Ok, now we are getting somewhere, I'm getting the following output:
>
>rad_recv: Access-Request packet from host 192.168.2.80:43835, id=102,
>length=234
> User-Name = "[EMAIL PROTECTED]"
> Digest-Attributes = 0x0a05313031
> Digest-Attributes = 0x010e3139322e3136382e322e3830
> Digest-Attributes =
> 0x022a34363939653236343763333537313631373066343236656466366262383661666535633736636466
> Digest-Attributes = 0x04127369703a3139322e3136382e322e3830
> Digest-Attributes = 0x030a5245474953544552
> Digest-Attributes = 0x050661757468
> Digest-Attributes = 0x090a3030303134313333
> Digest-Attributes = 0x081237633762663032366635646533653537
> Digest-Response = "90ea471ad7040bab866ffa15ee80e21d"
> Service-Type = Authenticate-Only
> Sip-Uri-User = "101"
> NAS-Port = 5060
> NAS-IP-Address = 192.168.2.80
> Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 6
> modcall[authorize]: module "preprocess" returns ok for request 6
>radius_xlat: '/var/log/radius/radacct/192.168.2.80/auth-detail-20070715'
>rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
>expands to /var/log/radius/radacct/192.168.2.80/auth-detail-20070715
> modcall[authorize]: module "auth_log" returns ok for request 6
>perl_pool: item 0x8af4268 asigned new request. Handled so far: 1 found
>interpetator at address 0x8af4268 perl_pool total/active/spare [32/0/32]
>Unreserve perl at address 0x8af4268
> modcall[authorize]: module "perl" returns ok for request 6
>modcall: leaving group authorize (returns ok) for request 6
>auth: No authenticate method (Auth-Type) configuration found for the request:
>Rejecting the user
>auth: Failed to validate the user.
>Login incorrect: [EMAIL PROTECTED]/<no User-Password attribute>] (from client
>openser port 5060) Delaying request 6 for 1 seconds Finished request 6 Going
>to the next request Waking up in 2 seconds...
>
>I think I have a section missing from FreeRadius configuration, is that
>correct?
>
>Zap2Link
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL
>PROTECTED]
>Sent: Tuesday, July 17, 2007 12:08 PM
>To: FreeRadius users mailing list
>Subject: Re: RLM_PERL integration issue
>
>radiusd -X
>
>Ivan Kalik
>Kalik Informatika ISP
>
>
>
>
>Dana 17/7/2007, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]>
>piĹĄe:
>
>>Hi All,
>>
>>
>>
>> I've followed the rlm_perl information to integrate a PERL based
>>example for Radius Authentication.
>>
>>I basically used the same example that is in the document. I know that
>>the script is loaded whe FreeRadius is loaded, however, It would seem
>>that all requests to the Radius server are not processed via rlm_perl.
>>
>>
>>
>> Is there a way to verify that rlm_perl is invoked?
>>
>>
>>
>>Zap2Link
>>
>>
>>
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
