manIP wrote:
hereunder is the output debug:
rad_recv: Access-Request packet from host x.x.x.x:2658, id=49, length=58
User-Name = "xxx"
User-Password = "xxx"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: Looking up realm "xxx" for User-Name = "xxx"
rlm_realm: No such realm "xxxx"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
Exec-Program output:
Exec-Program: returned: 2
rlm_exec (myauth): External script failed
modcall[authorize]: module "myauth" returns fail for request 0
modcall: leaving group authorize (returns fail) for request 0
Finished request 0
Going to the next request
For comparison sake here is my debug output (running on my modified code):
rad_recv: Access-Request packet from host xxx.xxx.xxx.xxx:xxxx, id=146,
length=159
Framed-Protocol = PPP
User-Name = "xyz"
User-Password = "123"
NAS-Port-Type = Virtual
NAS-Port = xxxxxxxx
NAS-Port-Id = "x/x/x/xx.xx"
Connect-Info = "AutoShaped"
Service-Type = Framed-User
NAS-IP-Address = xxx.xxx.xxx.xxx
Proxy-State = 0x313938
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 9
modcall[authorize]: module "preprocess" returns ok for request 9
modcall[authorize]: module "chap" returns noop for request 9
modcall[authorize]: module "mschap" returns noop for request 9
rlm_realm: Looking up realm "myrealm.com" for User-Name = "xyz"
rlm_realm: No such realm "myrealm.com"
modcall[authorize]: module "suffix" returns noop for request 9
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 9
users: Matched entry DEFAULT at line 54
modcall[authorize]: module "files" returns ok for request 9
radius_xlat: 'u:xyz'
radius_xlat: 'p:123'
Exec-Program output:
Exec-Program: returned: 0
rlm_exec (exec-radauth): External script rejected user
modcall[authorize]: module "exec-radauth" returns reject for request 9
modcall: leaving group authorize (returns reject) for request 9
Invalid user: [xyz/123] (from client abcd port 123456789)
Sending Access-Reject of id 146 to xxx.xxx.xxx.xxx port xxxx
Proxy-State = 0x313938
Finished request 9
Going to the next request
Obviously my changes make it different...
I would be very interested to find out what we are doing wrong, as I'm
sure you can imagine I would much rather be running the official version
of the code!
Thanks for all the time Alan, it is as always much appreciated
--
Q: I want to be a sysadmin. What should I do?
A: Seek professional help.
----------------------------------------------------------------------
Get a free email account with anti spam protection.
http://www.bluebottle.com/tag/2
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
