Alan DeKok-2 wrote > > ulislam.raihan wrote: >> Hi Alan , >> The document says >> "/The default destination of a CoA packet is the NAS (or client) >> # the sent the original Access-Request or Accounting-Request./" > > Yes. To the *IP* of the NAS. But which port? > To Alan>> That was my question in previous mail. So i have to mention the > CoA port in home_server section of originate-coa file . If my > understanding is right > >> So in the Access-Request it is mentioned as shown in below >> >> rad_recv: Access-Request packet from host 127.0.0.1 port 57378, id=1, >> length=59 >> User-Name = "testing" >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 4200 > > The NAS-Port is *not* the CoA port. > >> User-Password = "password" >> >> But then why it is showing "Unknown destination". The log from the >> radiusd >> shows below. >> Thu Apr 5 13:49:52 2012 : Info: WARNING: Unknown destination >> 127.0.0.1:4200 >> for CoA request. > > Yes... because you didn't configure the shared secret for CoA. > To Alan>> where i configure the secret for CoA? I hope in clients.conf. > Then it will look like this > client 127.0.01 { > secret = testing123-2 > shortname = private-network-2 > coa_server = localhost-coa > } > > and in originate-coa the configuration will be > home_server localhost-coa { > type = coa > > # > # Note that a home server of type "coa" MUST be a real NAS, > # with an ipaddr or ipv6addr. It CANNOT point to a virtual > # server. > # > ipaddr = 127.0.0.1 > port = 4200 > > # This secret SHOULD NOT be the same as the shared > # secret in a "client" section. > secret = testing1234 > > # CoA specific parameters. See raddb/proxy.conf for details. > coa { > irt = 2 > mrt = 16 > mrc = 5 > mrd = 30 > } > } > >> I have check with the netstat command in the OS that a java program is >> listening to the port 4200. > > That doesn't matter. > >> Do i have to configure the NAS client IP and port in home_server section >> of >> originate-coa file ? > > That's what the documentation says. > > Alan DeKok. > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > Quoted from: http://freeradius.1045715.n5.nabble.com/How-to-configure-COA-in-freeRadius-tp5620185p5622396.html
-- View this message in context: http://freeradius.1045715.n5.nabble.com/How-to-configure-COA-in-freeRadius-tp5620185p5622416.html Sent from the FreeRadius - User mailing list archive at Nabble.com. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html