Hi! > promisc mode. Maybe it's not possible at all, because the driver must > support "promisc-mode" as well, but you have to use the real "ip" command > from the iproute2 suite to use the "ip link set dev <if> promisc on" command.
It seems that promisc mode isn't working at all. The promisc flag can be set on the interface, but it isn't really turned on. I had to reflash a FreeWRT Router in the field back to OpenWRT, since promisc mode is needed for doing layer 2 bridging with two interfaces. This is no problem, when using OpenWRT. I guess that bridging isn't really working on FreeWRT (with at least one of the network devices). Or is the switch of the interfaces to promisc mode possible in another way? I have tried to bridge a tap Device and the internal ethernet device. I didn't have time to debug this. But I saw that I got a arp entry on the lan side, but not on the other endpoint of the vpn tunnel. So I guess that it might be just one of the two drivers (tap or ethx.x) which is broken. Flashing back to OpenWRT and usind exactly the same syntax got me a working layer 2 bridging setup. Greetings Torge _______________________________________________ freewrt-users mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-users
