Hi, after (successfully) using DD-WRT i wanted more freedom and chose FreeWRT. Since i am not afraid of compiling stuff myself i used the ADK to configure and compile my very own image for my WL500gP. After a lot of problems flashing, trying A LOT of different ways of getting the image onto my box (for a while i thought i bricked it) -- it still never boot up successfully... Rescue mode does work, but after normal boot nothing works (Power LED is on [never flashes or anything] and the used LAN-Port-LED is also on).
So i decided to give the WIB image a try -- and damn that works out of the box. I then upgraded to my very own image -- doesn't work again. I really would love to get my ADK image to work... FYI: - I don't run in any compilation erros - I use the 1.0.3 branch, checkout from svn. - After a lot of problems i guess i finally found my prefered way of flashing: using the rescue mode and the flash.sh script (from svn TRUNK) - I use Gentoo and had everything needed to get ADK work already installed. - I (of course) tried different settings in ADK mainly to reduce size of the image (i hoped that is the problem) So my questions is: Are there any known problems when compiling yourself, like possible misconfiguration? BTW: Is there any paper/howto on how i boot from usb directly? I want to overcome slowness, space and possible brick of internal flash... I found HowTos for OpenWrt, but i was not able to find good resources for special topics like that for FreeWRT -- any public forums? Thanks in advance for any help! _______________________________________________ freewrt-users mailing list [email protected] https://www.freewrt.org/lists/listinfo/freewrt-users
