The HP DL360 & DL380 are the hardware recommendations l was making to you.
You would install Secure Platform on them (20 minutes max, it's that simple) and then go from there.
Depending on what Checkpoint version you're currently running will determine how easy it would be to migrate to SPLAT (Secure PLATform) R56 (or whichever version you wish to run).
We are running ours with cluster XL and VPN.
These servers are hardware overkill for what you'll be using them for, so you'll have plenty of growth built in.
Make sure you buy the G3 versions of the servers, and not the more recent G4. The reason is that the 5i raid card on the G3's is supported by SPLAT, while the G4's 6i raid card is not yet supported to my knowledge (unless they have rectified that very recently).
We have each of our DL380's configured with 2 disks mirrored (RAID 1), twin 3.06 Ghz Xeon CPU's (one will do fine, we just wanted max double redundancy), and redundant power supplies.
l'm currently building our DL360's for our office location after seeing how well the DL380's & SPLAT perform at the co-lo.
Al
At 10:42 PM 2/9/2005, Shane Presley wrote:
Sounds like a DL380 would do it. So that is different than SecurePlatform? What OS does it run under the hood?
Thanks, Shane
On Wed, 9 Feb 2005 20:48:31 -0600, Alan Choyna <[EMAIL PROTECTED]> wrote: > We use DL380's, as you have room for two 4 port cards > (http://www.intel.com/network/connectivity/products/pro1000mt_quad_server_adapter.htm) > as well as the 2 gigabit ports that come with the server, as well as having > redundant power supplies. > > We use DL360's for our other location, with one four port card. > > Alan > > At 08:06 PM 2/9/2005, Shane Presley wrote: > >Hello, > > > >We run CheckPoint FW-1 on Solaris with ClusterXL for our primary > >firewalls. That handles all our production traffic. > > > >Currently our backup network is 100MB to the backup clients, and > >1000MB to the backup server. That backup network is not firewalled > >(there are multiple segments). It just just a router with ACLs. But > >we would like to switch and use CheckPoint. Our Solaris firewalls do > >not have the capacity to handle that additional traffic. So we are > >considering adding a new firewall (or pair) just for the backup > >segments. > > > >Any recommendations? No VPN, very simple traffic. Probably need 4-6 > >100MB interfaces and one or two 1000MB interfaces. Throughput would > >have to be 1GB. > > > >So it looks like SPLAT might do it. But I've never used SPLAT. What > >hardware would I run it on? Or is that bundled with hardware? > > > >Thanks, > >Shane > > > >================================================= > >To set vacation, Out-Of-Office, or away messages, > >send an email to [EMAIL PROTECTED] > >in the BODY of the email add: > >set fw-1-mailinglist nomail > >================================================= > >To unsubscribe from this mailing list, > >please see the instructions at > >http://www.checkpoint.com/services/mailing.html > >================================================= > >If you have any questions on how to change your > >subscription options, email > >[EMAIL PROTECTED] > >================================================= > > ================================================= > To set vacation, Out-Of-Office, or away messages, > send an email to [EMAIL PROTECTED] > in the BODY of the email add: > set fw-1-mailinglist nomail > ================================================= > To unsubscribe from this mailing list, > please see the instructions at > http://www.checkpoint.com/services/mailing.html > ================================================= > If you have any questions on how to change your > subscription options, email > [EMAIL PROTECTED] > ================================================= >
================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
================================================= To set vacation, Out-Of-Office, or away messages, send an email to [EMAIL PROTECTED] in the BODY of the email add: set fw-1-mailinglist nomail ================================================= To unsubscribe from this mailing list, please see the instructions at http://www.checkpoint.com/services/mailing.html ================================================= If you have any questions on how to change your subscription options, email [EMAIL PROTECTED] =================================================
