on 1/15/03 8:01 PM, Obi-Wan at [EMAIL PROTECTED] wrote: > On 1/15/03 5:29 AM, "Ed Zelinsky" <[EMAIL PROTECTED]> Spew into the > Cybertrough: > >> on 1/15/03 7:21 AM, Luca Rescigno at [EMAIL PROTECTED] wrote: >> >>>> Thanks very much- I can work with that info... >>>> >>>> So, it's not some kind of pismo incompatibility issue, or rpm speed >>>> issue >>>> then? >>>> >>>> >>>> Ed >>> >>> I don't know if it's incompatible... it's possible but it doesn't seem >>> likely. However, I am sure it's not too high RPMs for your Pismo, >>> that's not an issue. >>> >> Just Connected to a G4 tower and got the "this disk is unreadable. Do you >> want to initialize or eject" dialog box so the drive is working. >> >> it must be my Pismo. > > It's not your Pismo. There is no incompatibility with a drive in an > enclosure through a FW bridge. Just plug the drive in to the AC. Plug the > FW cable into the Pismo, and open Drive setup and format the drive. IT > should work fine. The Jumper in all FW drives should be set to master. I updated the OS from 9 to 9.1 and that seemed to do it.
Thank you ! ez -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
