On Thursday, June 26, 2003, at 06:41 PM, Hamlin Krewson wrote: > >> On Thu, 26 Jun 2003 16:38:24 -0500, Bill Vader wrote: >>> Ok, I have the keyboard off again, is that the processor be under the >>> heatsink in the lower left side of the under-keyboard area? If so, is >>> that a >>> handle that goes under the padded area next to the RAM? If that is >>> so, why >>> do they have to use tiny Torx screws? I can never find that bit. >>> >>> Bill
Simpler way to get the Torx 8 (which is the size you'll need on a Pismo) - go to your local Sears store, and get just the Torx-8 screwdriver there. Their Craftsman one has the lifetime warranty on it (unless you try to lift the Hulk with it and bend it through misuse... ;-) That T-8 screwdriver, a small Phillips screwdriver, and (suggested, but optional) a plastic or nylon flat-bladed gizmo (need it in only a couple of spots in the disassembly, and not often even then) will take care of most all your repairs, upgrades, etc. HTH, Jim Rohde -- G-Books is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:" Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------