on 6/2/03 5:00 AM, G-List at [EMAIL PROTECTED] wrote: > > > On Monday, Jun 2, 2003, at 09:27 Pacific/Auckland, aussieblnd wrote: > >> Jumper settings on Drives maybe? >> >> >> > I have the 60Gb setup as the master and the 10Gb setup as the slave. > Both work fine as long as I boot into OSX from the 60Gb. If I try > booting into OS9.2.2 from the 10Gb I cannot mount the 60Gb. > I have also tried swapping them around to no avail. > > Mike
Hi Mike and all; There was some discussion on the list awhile back about this. It involved reformatting when switching between the built in ATA bus and an ATA card. You may end up having to do that, but someone on the list (I don't remember who) said just updating the disk drivers would work. So, if Drive Setup will see both drives, I would try updating the drivers first. If that doesn't work, then I guess it's reformat time. HTH --Thanks; Rev. George --Maranatha (means the Lord cometh) -- G-List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
