Brian Mahoney wrote:
----- Original Message ----- From: "Nathan Templeton" <[EMAIL PROTECTED]>Correct, the camera is sd based, however it has 64mgs built into the camera, so I haven't yet had the need to buy a larger card.. or for that matter a sd reader..
To: "G-List" <[EMAIL PROTECTED]>
Sent: Saturday, October 02, 2004 11:32 AM
Subject: DNT camera and 10.2?
Listers,
I'm pulling my hair out here.. I have a cheapy DNT G4-SD digital/usb camera.. That under os 9.2.2 would simply mount when plugged in and I could browse the pics. But now that I've upgraded to 10.2, I plug the cam in and nothing.. nada.. Boot into classic.. nada.. Reboot into 9.2.2, same same.. Googling has shown me that DNT only makes windows drivers.. and I've been to MacUpdate to try some of the generic drivers that are avail there.. And still nothing... UGGGH, Does anyone have any ideas on how I could get this to work? Or a driver from another cam that would do the trick?
-TIA
-nathan
Assuming the USB port actually works, and since the cam is SD based, couldn't you pick up an SD/CF/whatever flash card reader and use it to read the SD card? Readers are less than 20 bucks here in Canada. Mine reads 6 types of cards.
BM
But thanks for the info non the less...
-- G-List is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- We have Apple Refurbished Monitors in stock! | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-List list info: <http://lowendmac.com/lists/g-list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
