I have a few dial-up configs, to choose one you either tick one from a list under the dial up menu, top right of menu bar in Finder and then click connect. The tick stays there. Is that it? Is that the only indication I am really connected to the one I want (three hrs down the track I have sometimes forgotten!)

I go to the Internet Connection panel, Internal Modem panel and it shows Main Number! (Not the one I may be connected to). All others are greyed out. Status at bottom is "Connected to 203.etc (This IP number is useless to me).

Surely this is bad software mistake? It should show the particular connection under the modem tab and not default to main number when the main number is not being used and one is actually connected? The options are live (not greyed) when not connected and one can then use them instead of the Main Number.

But it is the lack of info (except that measly greyed out tick on the greyed out menu item) when connected that I am wondering about? In the main system prefs and network panel one can see the number of the ISP one is connected to, but that is still not enough info if one has a number of accounts on the same ISP.

I once used an alternate Configuration in the Internet Connect app to specify dialing my ISP from another location. Well, it worked fine the first time I told it to connect and then the next time it defaulted back to the Main number. Well the "Main" number was for my home town but I hadn't included the area code. So in this other location elsewhere in California that same number with the different local area code also dialed my ISP but at the other end of a fairly large area code. So it was not only long distance but several long calls (I was also sharing the connection wirelessly). So instead, now I use a different location in the Network Preference Pane.

This is a deficiency of the dialup procedure in OS X. As far as I can tell it treats other numbers in Internet Connect like alternate numbers to the main. For one thing this is not how it worked in OS 9 where the PPP control strip did allow you to setup different numbers for the same ISP and which ever you selected last stayed selected. In X I'd rather see the Location selection specify the ISP and Internet Connect (and it's menu) let you specify the POP number / location you want to use (and not have a "main" number). While changing Location isn't too bad, my wireless and other connections are usually not used in these cases, I just don't see it as necessary in any way.

Most of the time I operate out of a single Location for wireless, wired or cell phone. It's only when I use the modem I need to switch it. And it's a little ironic as I almost never use dialup to my home town POP.

--
G-List is sponsored by <http://lowendmac.com/> and...

Small Dog Electronics    http://www.smalldog.com | Refurbished Drives |
-- We have Apple Refurbished Monitors in stock!  |  & CDRWs on Sale!  |

     Support Low End Mac <http://lowendmac.com/lists/support.html>

G-List list info:       <http://lowendmac.com/lists/g-list.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[email protected]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/g-list%40mail.maclaunch.com/>

iPod Accessories for Less
at 1-800-iPOD.COM
Fast Delivery, Low Price, Good Deal
www.1800ipod.com

Reply via email to