Actually I do have Arctive Silver 5 (High Density Polysnthetic Silver Thermal 
Compound). I'm just worried because I noticed in their website that this 
compound was being recommended for Intel and AMD processors (which of course 
doesn't mean that it can't be used on a mac). I'm just taking into account the 
sage advice from Pete H about this particular compound being conductive. I was 
trying to avoid the Fry's trip, but I suppose I'll have to make it after all, 
and look for a silicone compound.
TIA.
Pete.

--- On Tue, 2/24/09, Len Gerstel <lgers...@gmail.com> wrote:

From: Len Gerstel <lgers...@gmail.com>
Subject: Re: Power Mac G4 Quicksilver
To: g3-5-list@googlegroups.com
Date: Tuesday, February 24, 2009, 12:07 PM



On Feb 24, 2009, at 2:57 PM, PETE wrote:
Suppose I don't use anything and just place the heatsink on the processor. Any 
harm in that?TIA.
Pete.

As long as you don't turn on the system there will be no harm. Once you turn it 
on, all bets are off. 
I would not run a processor without a heat sink compound for more than a few 
seconds. I have done that when I put a modded QS processor in my DA and fired 
it up just long enough to hear the start up chime to make sure everything is 
working before I reassemble it.
Heck, you can probably find someone on the swap list with 1/2 tube left over 
from an upgrade who would sell it to you for a buck or 2, shipped. Why take a 
chance?
Len





      
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed Low End Mac's G3-5 List, a 
group for those using G3, G4, and G5 desktop Macs - with a particular focus on 
Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette 
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
To unsubscribe from this group, send email to 
g3-5-list-unsubscr...@googlegroups.com
For more options, visit this group at 
http://groups.google.com/group/g3-5-list?hl=en
Low End Mac RSS feed at feed://lowendmac.com/feed.xml
-~----------~----~----~----~------~----~------~--~---

Reply via email to