So far everything I have tried fails. I even as a test swapped out the video cards witth the one from my workin Mac G4 MDD and it still powers up with red light on the motherboard but won't do anything else.
On Friday, November 2, 2012 1:58:02 AM UTC-4, CoolKat wrote: > > > The pram battery inside is might dead? Take out all the memory, PCI > cards and anything else that you can pull out and clean them off (the pins > especially) and reseat them carefully? Boot up while holding down the: > ctrl/command (key with the apple on it)/ "P" and "R" This will reset the > pram. > > If I missed anything else, I hope others can add their input too > because I'm sure there is more to check? I really don't think it major if > it was running before you let it sit? It could have been somewhere where > there was maybe a lot of humidity, dust or dirt? > > > -----Original Message----- > From: Buzzby > Sent: Nov 1, 2012 11:33 PM > To: g3-5...@googlegroups.com <javascript:> > Subject: PowerMac G4 Quicksilver > > > > I have a PowerMac G4 Quicksilver that I had sitting for about a year or > two. I went to see if it still works but it turns on but that is all. > Do you have any suggestions on what I should check for as to why it won't > work? As far as I remember it did work before. > > -- > You received this message because you are a member of G-Group, a group for > those using G3, G4, and G5 desktop Macs - with a particular focus on Power > Macs. > The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our > netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml > To post to this group, send email to g3-5...@googlegroups.com<javascript:> > For more options, visit this group at > http://groups.google.com/group/g3-5-list > > Scars only tell us where we have been, they do not have to dictate where we > are going... > > “Choose love and peace above all other options. Commit to the goal of > unconditional love and compassion for all life, in all its expressions, and > surrender all judgment to God. > > --- Dr. David R. Hawkins > > -- You received this message because you are a member of G-Group, a group for those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs. The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to g3-5-list@googlegroups.com For more options, visit this group at http://groups.google.com/group/g3-5-list
