On 01/08/2013 16:46, "TriumphNut" <rbt...@owc.net> wrote:
> I have two quicksilvers. The one with the 125GB Sonnet Daughterboard went out.
> Think the fan Quit and it Toasted the Chip.
>
> I Pulled the Ram, the 5 port USB2 PCI card, the 4Port Firewire PCI card and
> the
>
> NVIDIA GeForce2 MX with 32MB of SDRAM Graphics PCI card to switch to
>
> my other Quicksilver. only problem, the Tab on the Graphics card won't go
> into
>
> the Slot. I've carefully bent the tab both ways and it still won't go down.The
>
> Contact Strip will go in fine just the outer mounting tab lacks a good quarter
> inch
>
> Going down. I've been going inside my Mac's since 1986 and this is the
> first
>
> time I've been stumped with this.
>
> I have software that won't work with my Intel Mac Pro Tower.
> May be forced to buy another Quicksilver on eBay.
>
> RHB
If it's the green tab which just retains the back of the card just snap
it off if it's a problem - I snapped mine off by accident but the card still
worked just fine.......
Pete
--
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list
---
You received this message because you are subscribed to the Google Groups
"G-Group" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to g3-5-list+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
