Try interrupting the boot at the countdown, type "boot -c". Then, at the bootconfig prompt, type "disable agp0". All without the quotes, of course. It's not a permanent solution, but may point us in the right direction.
Matt Smollinger Application Engineer for Convergence Tech. AdvancedAV ATG > From: Robert L Cochran <[EMAIL PROTECTED]> > Date: Mon, 01 Oct 2007 07:15:00 -0400 > To: g4u-help <g4u-help@feyrer.de> > Subject: Re: [g4u-help] 2.4a Hangs on Asrock 939Dual-SATA2 Motherboard (agp0 > problem?) > > Here is the output I promised to post, from g4u. I'm showing the last > few lines prior to the hang. Please bear in mind that I've hand-typed > what you see below after hand-copying it from the screen: > > > pchb0 at pci 0 dev 1 function 0: Acer Labs product 0x524b (rev 0x00) > pci1 at ppb0 bus 1 > pci1: i/o space, memory space enabled, rd/line, wr/inv ok > vga1 at pci1 dev0 function 0: Nvidia product 0x391 (rev 0xa1) > vga1 WARNING: ignoring 64-bit BAR at 0x14 > vga1 WARNING: ignoring 64-bit BAR at 0x1c > wsdisplay0 at vga1 kbdmux1: console (80x25, vt100 emulation) > direct rendering for vga1 unsupported > ppb1 at pci0 dev2 function 0: Acer Labs product 0x524c (rev 0x00) > pci2 at ppb1 bus 2 > pci2: i/o space, memory space enabled, rd/line, wr/inv ok > pchb1 at pci 0 dev 4 function 0 > pchb1: Acer Labs M1689 Host-PCI Bridge (rev 0x00) > agp0 at pchb1 > [g4u hangs at above line] > > > The primary graphics adapter is a PCI GeForce card from BFG. I'll check > for the exact model, but I think I was incorrect as giving it as the > Nvidia 7900 series. It is probably the Nvidia 7600 series. > > Any ideas about what is hanging g4u? > > Thanks > > Bob > > > Robert L Cochran wrote: >> I'm trying to use g4u 2.4a (yes, Hubert's most recent!) on a system with >> this motherboard: >> >> http://www.asrock.com/mb/overview.asp?Model=939Dual-SATA2 >> >> Which is running the 2.20 BIOS. I have since added a compUSA brand >> Firewire 400 PCI card and an BFG brand GeForce card graphics (the 7900 >> series). >> >> I notice there is a 2.30 BIOS version available documented as ' Patch >> nVidia 5950 AGP card.' >> >> g4u hangs on a message related to agp0. >> >> I know I should provide a few lines of the actual output, but I forgot >> and my wife has since returned to using the computer. I'll post relevent >> output messages tomorrow. >> >> Meanwhile, does g4u have trouble with ULi or Nvidia chipsets? >> >> Thanks >> >> Bob Cochran >> Greenbelt, Maryland, USA >> >> >> >> >> ------------------------------------------------------------------------- >> This SF.net email is sponsored by: Microsoft >> Defy all challenges. Microsoft(R) Visual Studio 2005. >> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ >> _______________________________________________ >> g4u-help mailing list >> g4u-help@feyrer.de >> https://lists.sourceforge.net/lists/listinfo/g4u-help >> >> >> > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > g4u-help mailing list > g4u-help@feyrer.de > https://lists.sourceforge.net/lists/listinfo/g4u-help ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ g4u-help mailing list g4u-help@feyrer.de https://lists.sourceforge.net/lists/listinfo/g4u-help
