Ahhh wait! I do!! On the AGGREGATION Server, I have both a gmetad.conf and a gmond.conf (I also monitor the server itself).
I configured RECEIVE channels in the gmond.conf on the aggregation server for every cluster, specifying the IP that the clusters will be sending on. Is that wrong? -RC Ron Cavallo Sr. Director, Infrastructure Saks Fifth Avenue / Saks Direct 12 East 49th Street New York, NY 10017 212-451-3807 (O) 212-940-5079 (fax) 646-315-0119(C) www.saks.com -----Original Message----- From: Seth Graham [mailto:set...@fnal.gov] Sent: Wednesday, March 23, 2011 11:28 AM To: Ron Cavallo Cc: Bernard Li; ganglia-general@lists.sourceforge.net Subject: Re: [Ganglia-general] Need help configuring clusters to use separate multicast IP On Mar 23, 2011, at 10:12 AM, Ron Cavallo wrote: > I see. So I need a separate IP AND A SEPARATE PORT. Got it. > > Also, I use a single gmond in each cluster to aggregate the single > cluster. I configure the gmetad to talk to only gmond from each cluster. > Is that wrong? No, your configuration is correct if the above is how you've set it up. I interpreted your previous message as saying you had a gmond process with udp_recv_channels for every cluster. ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Ganglia-general mailing list Ganglia-general@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/ganglia-general
