On Wed, 21 Oct 2020 at 18:07, Richard Earnshaw
<richard.earns...@foss.arm.com> wrote:
>
> On 21/10/2020 16:49, Christophe Lyon via Gcc-patches wrote:
> > On Tue, 20 Oct 2020 at 13:25, Richard Earnshaw
> > <richard.earns...@foss.arm.com> wrote:
> >>
> >> On 20/10/2020 12:22, Richard Earnshaw wrote:
> >>> On 19/10/2020 17:32, Christophe Lyon via Gcc-patches wrote:
> >>>> On Mon, 19 Oct 2020 at 16:39, Richard Earnshaw
> >>>> <richard.earns...@foss.arm.com> wrote:
> >>>>>
> >>>>> On 12/10/2020 08:59, Christophe Lyon via Gcc-patches wrote:
> >>>>>> On Thu, 8 Oct 2020 at 11:58, Richard Earnshaw
> >>>>>> <richard.earns...@foss.arm.com> wrote:
> >>>>>>>
> >>>>>>> On 08/10/2020 10:07, Christophe Lyon via Gcc-patches wrote:
> >>>>>>>> On Tue, 6 Oct 2020 at 18:02, Richard Earnshaw
> >>>>>>>> <richard.earns...@foss.arm.com> wrote:
> >>>>>>>>>
> >>>>>>>>> On 29/09/2020 20:50, Christophe Lyon via Gcc-patches wrote:
> >>>>>>>>>> When mi_delta is > 255 and -mpure-code is used, we cannot load
> >>>>>>>>>> delta
> >>>>>>>>>> from code memory (like we do without -mpure-code).
> >>>>>>>>>>
> >>>>>>>>>> This patch builds the value of mi_delta into r3 with a series of
> >>>>>>>>>> movs/adds/lsls.
> >>>>>>>>>>
> >>>>>>>>>> We also do some cleanup by not emitting the function address and
> >>>>>>>>>> delta
> >>>>>>>>>> via .word directives at the end of the thunk since we don't use
> >>>>>>>>>> them
> >>>>>>>>>> with -mpure-code.
> >>>>>>>>>>
> >>>>>>>>>> No need for new testcases, this bug was already identified by
> >>>>>>>>>> eg. pr46287-3.C
> >>>>>>>>>>
> >>>>>>>>>> 2020-09-29 Christophe Lyon <christophe.l...@linaro.org>
> >>>>>>>>>>
> >>>>>>>>>> gcc/
> >>>>>>>>>> * config/arm/arm.c (arm_thumb1_mi_thunk): Build mi_delta in
> >>>>>>>>>> r3 and
> >>>>>>>>>> do not emit function address and delta when -mpure-code is
> >>>>>>>>>> used.
> >>>>>>>>>
> >>>>>>>> Hi Richard,
> >>>>>>>>
> >>>>>>>> Thanks for your comments.
> >>>>>>>>
> >>>>>>>>> There are some optimizations you can make to this code.
> >>>>>>>>>
> >>>>>>>>> Firstly, for values between 256 and 510 (inclusive), it would be
> >>>>>>>>> better
> >>>>>>>>> to just expand a mov of 255 followed by an add.
> >>>>>>>> I now see the splitted for the "Pe" constraint which I hadn't noticed
> >>>>>>>> before, so I can write something similar indeed.
> >>>>>>>>
> >>>>>>>> However, I'm note quite sure to understand the benefit in the split
> >>>>>>>> when -mpure-code is NOT used.
> >>>>>>>> Consider:
> >>>>>>>> int f3_1 (void) { return 510; }
> >>>>>>>> int f3_2 (void) { return 511; }
> >>>>>>>> Compile with -O2 -mcpu=cortex-m0:
> >>>>>>>> f3_1:
> >>>>>>>> movs r0, #255
> >>>>>>>> lsls r0, r0, #1
> >>>>>>>> bx lr
> >>>>>>>> f3_2:
> >>>>>>>> ldr r0, .L4
> >>>>>>>> bx lr
> >>>>>>>>
> >>>>>>>> The splitter makes the code bigger, does it "compensate" for this by
> >>>>>>>> not having to load the constant?
> >>>>>>>> Actually the constant uses 4 more bytes, which should be taken into
> >>>>>>>> account when comparing code size,
> >>>>>>>
> >>>>>>> Yes, the size of the literal pool entry needs to be taken into
> >>>>>>> account.
> >>>>>>> It might happen that the entry could be shared with another use of
> >>>>>>> that
> >>>>>>> literal, but in general that's rare.
> >>>>>>>
> >>>>>>>> so f3_1 uses 6 bytes, and f3_2 uses 8, so as you say below three
> >>>>>>>> thumb1 instructions would be equivalent in size compared to loading
> >>>>>>>> from the literal pool. Should the 256-510 range be extended?
> >>>>>>>
> >>>>>>> It's a bit borderline at three instructions when literal pools are not
> >>>>>>> expensive to use, but in thumb1 literal pools tend to be quite small
> >>>>>>> due
> >>>>>>> to the limited pc offsets we can use. I think on balance we probably
> >>>>>>> want to use the instruction sequence unless optimizing for size.
> >>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> This is also true for
> >>>>>>>>> the literal pools alternative as well, so should be handled before
> >>>>>>>>> all
> >>>>>>>>> this.
> >>>>>>>> I am not sure what you mean: with -mpure-code, the above sample is
> >>>>>>>> compiled as:
> >>>>>>>> f3_1:
> >>>>>>>> movs r0, #255
> >>>>>>>> lsls r0, r0, #1
> >>>>>>>> bx lr
> >>>>>>>> f3_2:
> >>>>>>>> movs r0, #1
> >>>>>>>> lsls r0, r0, #8
> >>>>>>>> adds r0, r0, #255
> >>>>>>>> bx lr
> >>>>>>>>
> >>>>>>>> so the "return 510" case is already handled as without -mpure-code.
> >>>>>>>
> >>>>>>> I was thinking specifically of the thunk sequence where you seem to be
> >>>>>>> emitting instructions directly rather than generating RTL. The
> >>>>>>> examples
> >>>>>>> you show here are not thunks.
> >>>>>>>
> >>>>>> OK thanks for the clarification.
> >>>>>>
> >>>>>> Here is an updated version, split into 3 patches to hopefully make
> >>>>>> review easier.
> >>>>>> They apply on top of my other mpure-code patches for PR96967 and
> >>>>>> PR96770:
> >>>>>> https://gcc.gnu.org/pipermail/gcc-patches/2020-September/554956.html
> >>>>>> https://gcc.gnu.org/pipermail/gcc-patches/2020-September/554957.html
> >>>>>>
> >>>>>> I kept it this way to make incremental changes easier to understand.
> >>>>>>
> >>>>>> Patch 1: With the hope to avoid confusion and make maintenance easier,
> >>>>>> I have updated thumb1_gen_const_int() so that it can generate either
> >>>>>> RTL or
> >>>>>> asm. This way, all the code used to build thumb-1 constants is in the
> >>>>>> same place,
> >>>>>> in case we need to improve/fix it later. We now generate shorter
> >>>>>> sequences in
> >>>>>> several cases matching your comments.
> >>>>>>
> >>>>>> Patch 2: Removes the equivalent loop from thumb1_movsi_insn pattern and
> >>>>>> calls thumb1_gen_const_int.
> >>>>>>
> >>>>>> Patch 3: Update of the original patch in this thread, now calls
> >>>>>> thumb1_gen_const_int.
> >>>>>
> >>>>> Yuk! Those changes to thumb1_gen_const_int are horrible.
> >>>>>
> >>>>> I think we should be able to leverage the fact that the compiler can use
> >>>>> C++ now to do much better than that, for example by making that function
> >>>>> a template. For example (and this is just a sketch):
> >>>>>
> >>>>
> >>>> Indeed! I didn't think about it since there is no other use of
> >>>> templates in arm.c yet.
> >>>> I'll send an update soon.
> >>>>
> >>>> Other than that, does the approach look OK to you?
> >>>>
> >>>
> >>> Yes, I think this is heading in the right direction. Bringing the two
> >>> immediate generating operations into a single function can only be a
> >>> good thing.
> >>>
> >>> Looking again at your example constant sequences, I see:
> >>>
> >>> 0x1000010:
> >>> movs r3, #16
> >>> lsls r3, #16
> >>> adds r3, #1
> >>> lsls r3, #4
> >>> 0x1000011:
> >>> movs r3, #1
> >>> lsls r3, #24
> >>> adds r3, #17
> >>>
> >>> The first of these looks odd, given the second sequence. Why doesn't
> >>> the first expand to
> >>>
> >>> 0x1000010:
> >>> movs r3, #16
> >>> lsls r3, #16
> >>> adds r3, #16
> >>>
> >> Err, I mean to:
> >>
> >>
> >> 0x1000010:
> >> movs r3, #1
> >> lsls r3, #24
> >> adds r3, #16
> >>
> >> ?
> >
> > Because I first try to right-shift the constant, hoping to reduce its
> > range and need less instructions to build the higher part, then
> > left-shift back.
> >
> > In this particular case, we'd need to realize that there are many
> > zeros "inside" the constant.
> >
> > If I remove the part that tries to reduce the range, I do get that
> > sequence, but for 764 I now generate
> > movs r3, #2
> > lsls r3, #8
> > adds r3, #252
> > instead of
> > movs r3, #191
> > lsls r3, #2
> >
> > A possibility would be to try both approaches and keep the shortest one.
>
> Lets leave that for now, it's not important to fixing the main issue;
> but we should remember we need to come back to it at some point.
>
Thanks, that's what I was thinking too.
> There are other tricks as well, such as
>
> 0xffffff
>
> can be done as
>
> 0x1000000 - 1
>
> and
>
> 0xfffffd
>
> as
>
> 0x1000000 - 3
>
> but these can wait as well.
>
Didn't we already need to handle such tricks? I'm surprised this
wasn't needed earlier.
>
> R.
>
> >
> >
> >>>
> >>> R.
> >>>
> >>>> Thanks,
> >>>>
> >>>> Christophe
> >>>>
> >>>>> class t1_rtl
> >>>>> {
> >>>>> public:
> >>>>> void ashift(int a) { gen_rtx_ASHIFT(a); }
> >>>>> void rshift(int b) { gen_rtx_SHIFTRT(b); }
> >>>>> };
> >>>>>
> >>>>> class t1_print
> >>>>> {
> >>>>> public:
> >>>>> t1_print (FILE *f) : t_file(f) {}
> >>>>> void ashift (int a) { fprintf (t_file, "a shift %d\n", a); }
> >>>>> void rshift (int b) { fprintf (t_file, "r shift %d\n", b); }
> >>>>> private:
> >>>>> FILE *t_file;
> >>>>> };
> >>>>>
> >>>>> template <class T>
> >>>>> void thumb1_gen_const_int(T t, int f)
> >>>>> {
> >>>>> // Expansion of thumb1_gen_const_int ...
> >>>>> t.ashift(f);
> >>>>> }
> >>>>>
> >>>>> // Usage...
> >>>>> void f1()
> >>>>> {
> >>>>> // Use the RTL expander
> >>>>> t1_rtl g;
> >>>>> thumb1_gen_const_int (g, 3);
> >>>>> }
> >>>>>
> >>>>> void f2()
> >>>>> {
> >>>>> // Use the printf expander writing to stdout
> >>>>> t1_print g(stdout);
> >>>>> thumb1_gen_const_int (g, 3);
> >>>>> }
> >>>>>
> >>>>> With this you can write thumb1_gen_const_int without having to worry
> >>>>> about which expander is being used in each instance and the template
> >>>>> expansion will use the right version.
> >>>>>
> >>>>> R.
> >>>>>
> >>>>>>
> >>>>>>>
> >>>>>>>>
> >>>>>>>>> I also suspect (but haven't check) that the base adjustment will
> >>>>>>>>> most commonly be a multiple of the machine word size (ie 4). If
> >>>>>>>>> that is
> >>>>>>>>> the case then you could generate n/4 and then shift it left by 2
> >>>>>>>>> for an
> >>>>>>>>> even greater range of literals.
> >>>>>>>> I can see there is provision for this in the !TARGET_THUMB1_ONLY
> >>>>>>>> case,
> >>>>>>>> I'll update my patch.
> >>>>>>>>
> >>>>>>>>> More generally, any sequence of up to
> >>>>>>>>> three thumb1 instructions will be no larger, and probably as fast
> >>>>>>>>> as the
> >>>>>>>>> existing literal pool fall back.
> >>>>>>>>>
> >>>>>>>>> Secondly, if the value is, for example, 65536 (0x10000), your code
> >>>>>>>>> will
> >>>>>>>>> emit a mov followed by two shift-by-8 instructions; the two shifts
> >>>>>>>>> could
> >>>>>>>>> be merged into a single shift-by-16.
> >>>>>>>>
> >>>>>>>> Right, I'll try to make use of thumb_shiftable_const.
> >>>>>>>>
> >>>>>>>>> Finally, I'd really like to see some executable tests for this, if
> >>>>>>>>> at
> >>>>>>>>> all possible.
> >>>>>>>> I mentioned pr46287-3.C, but that's not the only existing testcase
> >>>>>>>> that showed the problem. There are also:
> >>>>>>>> g++.dg/opt/thunk1.C
> >>>>>>>> g++.dg/ipa/pr46984.C
> >>>>>>>> g++.dg/torture/pr46287.C
> >>>>>>>> g++.dg/torture/pr45699.C
> >>>>>>>>
> >>>>>>>> Do you want that I copy one of these in the arm subdir and add
> >>>>>>>> -mpure-code in dg-options?
> >>>>>>>
> >>>>>>> On reflection, probably not - that just makes things more complicated
> >>>>>>> with all the dg-options mess (I'm worried about interactions with
> >>>>>>> other
> >>>>>>> sets of options on the command line and the fall-out from that). If
> >>>>>>> someone cares about pure-code they should be doing full testsuite runs
> >>>>>>> with it enabled and that should be sufficient.
> >>>>>>
> >>>>>> Yes, that's what I am doing manually, it's a bit tricky, and I use a
> >>>>>> modified simulator.
> >>>>>>
> >>>>>> Thanks,
> >>>>>>
> >>>>>> Christophe
> >>>>>>
> >>>>>>>
> >>>>>>> R.
> >>>>>>>
> >>>>>>>>
> >>>>>>>> Thanks,
> >>>>>>>>
> >>>>>>>> Christophe
> >>>>>>>>
> >>>>>>>>> R.
> >>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>> k# (use "git pull" to merge the remote branch into yours)
> >>>>>>>>>> ---
> >>>>>>>>>> gcc/config/arm/arm.c | 91
> >>>>>>>>>> +++++++++++++++++++++++++++++++++++++---------------
> >>>>>>>>>> 1 file changed, 66 insertions(+), 25 deletions(-)
> >>>>>>>>>>
> >>>>>>>>>> diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
> >>>>>>>>>> index ceeb91f..62abeb5 100644
> >>>>>>>>>> --- a/gcc/config/arm/arm.c
> >>>>>>>>>> +++ b/gcc/config/arm/arm.c
> >>>>>>>>>> @@ -28342,9 +28342,43 @@ arm_thumb1_mi_thunk (FILE *file, tree,
> >>>>>>>>>> HOST_WIDE_INT delta,
> >>>>>>>>>> {
> >>>>>>>>>> if (mi_delta > 255)
> >>>>>>>>>> {
> >>>>>>>>>> - fputs ("\tldr\tr3, ", file);
> >>>>>>>>>> - assemble_name (file, label);
> >>>>>>>>>> - fputs ("+4\n", file);
> >>>>>>>>>> + /* With -mpure-code, we cannot load delta from the constant
> >>>>>>>>>> + pool: we build it explicitly. */
> >>>>>>>>>> + if (target_pure_code)
> >>>>>>>>>> + {
> >>>>>>>>>> + bool mov_done_p = false;
> >>>>>>>>>> + int i;
> >>>>>>>>>> +
> >>>>>>>>>> + /* Emit upper 3 bytes if needed. */
> >>>>>>>>>> + for (i = 0; i < 3; i++)
> >>>>>>>>>> + {
> >>>>>>>>>> + int byte = (mi_delta >> (8 * (3 - i))) & 0xff;
> >>>>>>>>>> +
> >>>>>>>>>> + if (byte)
> >>>>>>>>>> + {
> >>>>>>>>>> + if (mov_done_p)
> >>>>>>>>>> + asm_fprintf (file, "\tadds\tr3, #%d\n",
> >>>>>>>>>> byte);
> >>>>>>>>>> + else
> >>>>>>>>>> + asm_fprintf (file, "\tmovs\tr3, #%d\n",
> >>>>>>>>>> byte);
> >>>>>>>>>> + mov_done_p = true;
> >>>>>>>>>> + }
> >>>>>>>>>> +
> >>>>>>>>>> + if (mov_done_p)
> >>>>>>>>>> + asm_fprintf (file, "\tlsls\tr3, #8\n");
> >>>>>>>>>> + }
> >>>>>>>>>> +
> >>>>>>>>>> + /* Emit lower byte if needed. */
> >>>>>>>>>> + if (!mov_done_p)
> >>>>>>>>>> + asm_fprintf (file, "\tmovs\tr3, #%d\n", mi_delta &
> >>>>>>>>>> 0xff);
> >>>>>>>>>> + else if (mi_delta & 0xff)
> >>>>>>>>>> + asm_fprintf (file, "\tadds\tr3, #%d\n", mi_delta &
> >>>>>>>>>> 0xff);
> >>>>>>>>>> + }
> >>>>>>>>>> + else
> >>>>>>>>>> + {
> >>>>>>>>>> + fputs ("\tldr\tr3, ", file);
> >>>>>>>>>> + assemble_name (file, label);
> >>>>>>>>>> + fputs ("+4\n", file);
> >>>>>>>>>> + }
> >>>>>>>>>> asm_fprintf (file, "\t%ss\t%r, %r, r3\n",
> >>>>>>>>>> mi_op, this_regno, this_regno);
> >>>>>>>>>> }
> >>>>>>>>>> @@ -28380,30 +28414,37 @@ arm_thumb1_mi_thunk (FILE *file, tree,
> >>>>>>>>>> HOST_WIDE_INT delta,
> >>>>>>>>>> fputs ("\tpop\t{r3}\n", file);
> >>>>>>>>>>
> >>>>>>>>>> fprintf (file, "\tbx\tr12\n");
> >>>>>>>>>> - ASM_OUTPUT_ALIGN (file, 2);
> >>>>>>>>>> - assemble_name (file, label);
> >>>>>>>>>> - fputs (":\n", file);
> >>>>>>>>>> - if (flag_pic)
> >>>>>>>>>> +
> >>>>>>>>>> + /* With -mpure-code, we don't need to emit literals for the
> >>>>>>>>>> + function address and delta since we emitted code to build
> >>>>>>>>>> + them. */
> >>>>>>>>>> + if (!target_pure_code)
> >>>>>>>>>> {
> >>>>>>>>>> - /* Output ".word .LTHUNKn-[3,7]-.LTHUNKPCn". */
> >>>>>>>>>> - rtx tem = XEXP (DECL_RTL (function), 0);
> >>>>>>>>>> - /* For TARGET_THUMB1_ONLY the thunk is in Thumb mode, so
> >>>>>>>>>> the PC
> >>>>>>>>>> - pipeline offset is four rather than eight. Adjust the
> >>>>>>>>>> offset
> >>>>>>>>>> - accordingly. */
> >>>>>>>>>> - tem = plus_constant (GET_MODE (tem), tem,
> >>>>>>>>>> - TARGET_THUMB1_ONLY ? -3 : -7);
> >>>>>>>>>> - tem = gen_rtx_MINUS (GET_MODE (tem),
> >>>>>>>>>> - tem,
> >>>>>>>>>> - gen_rtx_SYMBOL_REF (Pmode,
> >>>>>>>>>> - ggc_strdup
> >>>>>>>>>> (labelpc)));
> >>>>>>>>>> - assemble_integer (tem, 4, BITS_PER_WORD, 1);
> >>>>>>>>>> - }
> >>>>>>>>>> - else
> >>>>>>>>>> - /* Output ".word .LTHUNKn". */
> >>>>>>>>>> - assemble_integer (XEXP (DECL_RTL (function), 0), 4,
> >>>>>>>>>> BITS_PER_WORD, 1);
> >>>>>>>>>> + ASM_OUTPUT_ALIGN (file, 2);
> >>>>>>>>>> + assemble_name (file, label);
> >>>>>>>>>> + fputs (":\n", file);
> >>>>>>>>>> + if (flag_pic)
> >>>>>>>>>> + {
> >>>>>>>>>> + /* Output ".word .LTHUNKn-[3,7]-.LTHUNKPCn". */
> >>>>>>>>>> + rtx tem = XEXP (DECL_RTL (function), 0);
> >>>>>>>>>> + /* For TARGET_THUMB1_ONLY the thunk is in Thumb mode,
> >>>>>>>>>> so the PC
> >>>>>>>>>> + pipeline offset is four rather than eight. Adjust
> >>>>>>>>>> the offset
> >>>>>>>>>> + accordingly. */
> >>>>>>>>>> + tem = plus_constant (GET_MODE (tem), tem,
> >>>>>>>>>> + TARGET_THUMB1_ONLY ? -3 : -7);
> >>>>>>>>>> + tem = gen_rtx_MINUS (GET_MODE (tem),
> >>>>>>>>>> + tem,
> >>>>>>>>>> + gen_rtx_SYMBOL_REF (Pmode,
> >>>>>>>>>> + ggc_strdup
> >>>>>>>>>> (labelpc)));
> >>>>>>>>>> + assemble_integer (tem, 4, BITS_PER_WORD, 1);
> >>>>>>>>>> + }
> >>>>>>>>>> + else
> >>>>>>>>>> + /* Output ".word .LTHUNKn". */
> >>>>>>>>>> + assemble_integer (XEXP (DECL_RTL (function), 0), 4,
> >>>>>>>>>> BITS_PER_WORD, 1);
> >>>>>>>>>>
> >>>>>>>>>> - if (TARGET_THUMB1_ONLY && mi_delta > 255)
> >>>>>>>>>> - assemble_integer (GEN_INT(mi_delta), 4, BITS_PER_WORD, 1);
> >>>>>>>>>> + if (TARGET_THUMB1_ONLY && mi_delta > 255)
> >>>>>>>>>> + assemble_integer (GEN_INT(mi_delta), 4, BITS_PER_WORD,
> >>>>>>>>>> 1);
> >>>>>>>>>> + }
> >>>>>>>>>> }
> >>>>>>>>>> else
> >>>>>>>>>> {
> >>>>>>>>>>
> >>>>>>>>>
> >>>>>>>
> >>>>>
> >>>
> >>
>
