Hmm, I wonder if the problem is the hidden power pins, combined with slotting. Oh, Stuart...
On Aug 16, 2008, at 2:53 PM, Ludovic SMADJA wrote: > About the unused slots, it doesn't seems to be the problem. > > When I add the 2 unused slots to my schematics and link theirs > input pins to ground and output pin to NC symbol, drc2 removes the > warning but the spice-sdb give me more "Invalid wanted_pin passed > to get-nets [unknown]" > > I've already use slots in another circuit without any problem. > > Ludovic > > On Sat, Aug 16, 2008 at 4:51 PM, Peter Clifton <[EMAIL PROTECTED]> > wrote: > On Sat, 2008-08-16 at 09:26 -0400, John Doty wrote: > > On Aug 16, 2008, at 2:55 AM, Ludovic SMADJA wrote: > > > > > WARNING: Unused slot 3 of uref U2 > > > WARNING: Unused slot 4 of uref U2 > > > > I believe that unused slots are poison to the way spice-sdb works. > > For a slotted component, it expects that the model will implement > all > > slots. Since pins are positional in SPICE netlists, it needs to list > > every pin on the component. > > Perhaps for the spice backend, but IIRC, spice-sdb renames each > slot, so > U2 becomes. > > U2.1 > U2.2 > U2.3 > U2.4 > > e.g. 4 components instantiated. I might be wrong in the fine-print > though. > > -- > Peter Clifton > > Electrical Engineering Division, > Engineering Department, > University of Cambridge, > 9, JJ Thomson Avenue, > Cambridge > CB3 0FA > > Tel: +44 (0)7729 980173 - (No signal in the lab!) > > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user > > > > -- > Ludovic SMADJA > > > _______________________________________________ > geda-user mailing list > geda-user@moria.seul.org > http://www.seul.org/cgi-bin/mailman/listinfo/geda-user John Doty Noqsi Aerospace, Ltd. http://www.noqsi.com/ [EMAIL PROTECTED] _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user