To solved the thread.

With custom symbol with power pin, the netlist generated are ok.

Thanks for all your help.

Ludovic

On Sun, Aug 17, 2008 at 8:44 AM, Ludovic SMADJA <[EMAIL PROTECTED]>wrote:

> ok,
>
> So if I have correctly understood, the symbol provided with gEDA are
> designed to do PCB, not simulation.
>
> In case of simulation, it's simpler to have symbol with all pins (power
> included), in to order to netlist correctly.
>
> I will check with a custom symbol with power pin and I reply to you about
> the result.
>
> Thanks for your help.
>
> Ludovic
>
>
> On Sun, Aug 17, 2008 at 2:26 AM, Peter Clifton <[EMAIL PROTECTED]> wrote:
>
>> On Sat, 2008-08-16 at 15:59 -0400, John Doty wrote:
>> > On Aug 16, 2008, at 3:32 PM, John Doty wrote:
>> >
>> > > Hmm, I wonder if the problem is the hidden power pins,
>> >
>> > I note that it there is no mechanism to tell gnetlist what subcircuit
>> > pin a hidden net should attach to.
>>
>> You are correct. Remove the hidden power pins, and the warnings go away.
>> A little debugging code I added to gnetlist confirmed that these pins
>> are being passed as "unknown" into the C function behind "get-nets".
>>
>> The netlist output is "correct" (by some definition of correct) though,
>> in both cases. However.. perhaps your model for that gate wants power
>> pins passing to it...
>>
>> Best make up a custom symbol.
>>
>> > Again, it is strange to use a symbol designed for slotted printed
>> > circuit layout in a SPICE simulation.
>>
>> +1.
>>
>> --
>> Peter Clifton
>>
>> Electrical Engineering Division,
>> Engineering Department,
>> University of Cambridge,
>> 9, JJ Thomson Avenue,
>> Cambridge
>> CB3 0FA
>>
>> Tel: +44 (0)7729 980173 - (No signal in the lab!)
>>
>>
>>
>> _______________________________________________
>> geda-user mailing list
>> geda-user@moria.seul.org
>> http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
>>
>
>
>
> --
> Ludovic SMADJA
>



-- 
Ludovic SMADJA

_______________________________________________
geda-user mailing list
geda-user@moria.seul.org
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user

Reply via email to