Markus Hitter: ... > Whatever I try, pads can't be connected to anything. Not on > the solder side, not on the top side, not to vias.
The footprint pads might be on the "component" side. > What's the secret? > > The most simple footprint I tried looks that: > > Element["" "Solder Jumper on the solder side" "JUMPER_SOLDER" "" > 10 10 -5000 5000 0 100 ""] > ( > Pad[2200 -1500 2200 1500 3600 3200 2000 "1" "1" "square"] > Pad[-2200 -1500 -2200 1500 3600 3200 2000 "2" "2" "square"] > ElementLine [ ... > ) If your traces are on the solder side, try to add onsolder after square, like Pad[2200 -1500 2200 1500 3600 3200 2000 "1" "1" "square,onsolder"] There is also under "Edit->Move to current Layer M", but I haven't been able to move a footprint to the solder layer with that. Regards, /Karl Hammar --------- Aspö Data Lilla Aspö 148 S-742 94 Östhammar Sweden +46 173 140 57 _______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user