Am 17.10.2010 um 15:47 schrieb Stefan Salewski:
On Sun, 2010-10-17 at 14:50 +0200, Markus Hitter wrote:Hello all, yesterday I tried to replace a number of 2-pin jumpers (footprint JUMPER2) with solder jumpers.Of course, this should work fine, it does for me.gsch2pcb removes the old footprints, but for my 2009 snapshot it has notput the new ones, you have to do something like "load element data tobuffer" to insert the new ones, and you may have to load the new netlist again. And you have to watch for the orientation of the new footprints,you may have to rotate them 180 degree. And press "O" key to update ratsnest.Did you make your layout with the autorouter? I have done all manually,so I am not sure if the autorouter needs special care when exchanging footprints. For replacing footprints there is a special mode which allows you to replace single footprints -- sorry can not remember currently.
Thanks for the quick answer, Karl, Stefan. All what you suggest works fine already. The new pads appear, I route mostly manually and I can flip the pad
The problem is, an overlap between a pad and a track isn't recognized as a connection. I'll try to show this with a screenshot, the rats nest is freshly optimized:
<<inline: Bildschirmfoto.png>>
Markus
_______________________________________________ geda-user mailing list geda-user@moria.seul.org http://www.seul.org/cgi-bin/mailman/listinfo/geda-user