If you had problems on initialization then you should delete the CloudFormation stack and start from scratch. Then look in the various error logs to get further CloudFormation event logs AutoScaling event logs If the system comes up enough to respond to http then ssh into the system and look in /var/log/messages /var/log/cfn* /var/log/cloud* /var/log/mlcmd /var/opt/MarkLogic/ErrorLog.txt
That should get your much further. From: general-boun...@developer.marklogic.com [mailto:general-boun...@developer.marklogic.com] On Behalf Of Steven Drewe Sent: Tuesday, February 02, 2016 10:33 AM To: MarkLogic Developer Discussion <general@developer.marklogic.com> Subject: Re: [MarkLogic Dev General] New Install No Admin Role Thanks for quick response, 1) Yes, a several minutes. 2) We did to start with and got 401 returned so we tried restarting the config by flushing /var/opt/MarkLogic - apologies if this was our mistake! 3) We had subnet problems with the cloud formation so we used: EU (Ireland) ami-693c9a1a Now when accessing hostname:8001 we get the splash page plus the error given below, no login prompt. Regards, Steve From: general-boun...@developer.marklogic.com<mailto:general-boun...@developer.marklogic.com> [mailto:general-boun...@developer.marklogic.com] On Behalf Of David Lee Sent: 02 February 2016 15:23 To: MarkLogic Developer Discussion Subject: Re: [MarkLogic Dev General] New Install No Admin Role Several likely problems. 1) did you wait a while before going to port 8000 ? ( it takes a bit of time to fulluy config ) 2) Are you using the same user name as you used in CloudFormation ? 3) What CloudFormation template did you use ? From: general-boun...@developer.marklogic.com<mailto:general-boun...@developer.marklogic.com> [mailto:general-boun...@developer.marklogic.com] On Behalf Of Steven Drewe Sent: Tuesday, February 02, 2016 10:19 AM To: general@developer.marklogic.com<mailto:general@developer.marklogic.com> Subject: [MarkLogic Dev General] New Install No Admin Role Hi all, We're very new to Marklogic and have a single PC windows install working fine but we tried using the AWS Cloudformation and had some problems so we launched a single node install on EC2 and we're now getting the following error when we try to connect on 8000 and complete the setup: 500: Internal Server Error SEC-NOADMIN: (err:FOER0000) User does not have admin role. In /MarkLogic/security.xqy on line 5338 In sec:check-admin() In /MarkLogic/Admin/lib/status-check.xqy on line 16 In status-check() In / on line 6 Fairly obvious we've missed/messed up something. How's best to proceed from here? Best regards, Steve
_______________________________________________ General mailing list General@developer.marklogic.com Manage your subscription at: http://developer.marklogic.com/mailman/listinfo/general
