hi, I have a PROMISE controler also and i got it to work with grub. here is my config.
/etc/fstab /dev/ataraid/disc0/part1 /boot ext3 noauto,noatime 1 1 /dev/ataraid/disc0/part2 / ext3 noatime 0 0 /dev/ataraid/disc0/part3 /usr ext3 noatime 0 0 /dev/ataraid/disc0/part5 /home ext3 noatime 0 0 /dev/ataraid/disc0/part6 none swap sw 0 0 /dev/ataraid/disc0/part7 /str0 ext3 noatime 0 0 /boot/grub/grub.conf default 0 timeout 30 splashimage=(hd0,0)/boot/grub/splash.xpm.gz title=Gentoo Linux on RAID root (hd0,1) kernel (hd0,0)/boot/bzImage root=/dev/ataraid/disc0/part2 Hope it helps, lemme now if it worked for you RNuno -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: quinta-feira, 5 de Junho de 2003 18:57 To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [gentoo-user] Help with Promise RAID & Gentoo On Thu, Jun 05, 2003 at 06:54:36PM +0100, MooktaKiNG wrote: > OK. this is the most frustrating thing i've ever had with Gentoo. > > I can boot with the liveCD. I can load the produles, ataraid and > pdcraid. it does work. I install successfully. Then i install Grub. > I follow the howto and do root=/dev/ataraid/d0p1 > My /boot is a seperate partition in hda1. > > But it just doesn't boot. I gave up using grub for this, and used (groan) lilo. My /etc/fstab looks like this: /dev/ataraid/disc0/part1 /boot ext2 noauto,noatime 1 1 /dev/ataraid/disc0/part3 / ext3 noatime 1 1 /dev/ataraid/disc0/part2 none swap sw 0 0 /dev/ataraid/disc0/part5 /usr ext3 noatime 1 1 /dev/ataraid/disc0/part6 /var ext3 noatime 1 2 /dev/ataraid/disc0/part7 /usr/local ext3 noatime 1 2 /dev/ataraid/disc0/part8 /opt ext3 noatime 1 2 /dev/ataraid/disc0/part9 /home ext3 noatime 1 2 And my /etc/lilo.conf looks like this: menu-scheme=Wb prompt timeout = 50 lba32 boot=/dev/ataraid/disc0/disc disk = /dev/ataraid/disc0/disc bios = 0x80 map = /boot/System.map delay = 50 vga = normal # Normal VGA console # End LILO global section # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/ataraid/disc0/part3 append = "idebus=66, ide0=ata66" label = Gentoo read-only # read-only for checking image = /boot/vmlinuz.old root = /dev/ataraid/disc0/part3 label = Old.kernel read-only # read-only for checking I hope this helps. If you find a way to make grub work, please let me know, as I would much prefer to be using grub. Cheers, Dennis -- Dennis Soper [EMAIL PROTECTED] Network Supervisor Facilities Services-- The University of Oregon 1276 University of Oregon phone: 541-346-2286 Eugene, OR 97403 fax: 541-346-2299 Voice or no voice the people can always be brought to the bidding of the leaders. That is easy. All you have to do is to tell them they are being attacked, and denounce the pacifists for lack of patriotism and exposing the country to danger. It works the same in any country. --Hermann Goering -- [EMAIL PROTECTED] mailing list -- [EMAIL PROTECTED] mailing list