There's a driver for the 680 in 2.4.22-gss (one setting for udma, and one for the ideraid) that I am using in IDE mode. Much better than the 2.4.20 gentoo-sources for this card. Only prob is the card only has a cdrom on it, and I dont have a /dev/hda, but there is a /proc/ide/hda ...
BillK On Fri, 2003-09-05 at 11:28, Stephen Liu wrote: > Hi Kai, > > Thanks for your response. > > I tried hard to search silraid driver on Internet without result > including subscribing to "linux-kernel" mailing list, a very high > traffic list. > > I found Arjan's driver working on Medley software RAID (Silicon Image > 3112 SATARaid, CMD680) but I have no idea whether it works on Z-Cyber > ATA133 RAID controller. I am still searching its download website. > > B.R. > Stephen > > On Tue, 2003-09-02 at 23:57, Kai Lindenberg wrote: > > Hi Stephen, > > > > Am Dienstag, 2. September 2003 17:31 schrieb Stephen Liu: > > > This is my first time installing Gentoo. > > > > > > Hardware Config. > > > RAID-0 (Z-Cyber ATA133 RAID) > > > Drive-A: Connected to 1st slot of RAID controller > > > Drive-B: Connected to 2nd slot of RAID controller > > > > [...] > > > > > I did following steps; > > > 1)Booting up the PC with CD#1 > > > 2)At prompt > > > # gentoo md > > > cdimage root# fdisk -l > > > > > > Disk /dev/ide/host0/bus1/target0/lun0/disc: 40.0 GB > > > > [...] > > > > > Disk /dev/ide/host0/bus0/target0/lun0/disc: 40.0 GB > > > > [...] > > > > > Why it is not a single hard drive, instead 2 drives being seen. > > > One drive is of Linux system and another Win95 FAT32 (LBA) > > > system. > > > > > > Hey, you answered this question by yourself.... > > > > 1. This is not a "real" hardware raidcontroller, so you always see > > all connected drives, maybe the windows driver hides them. > > > > 2. You don't see an additional "drive" because you have no module > > for the linux kernel. Try to find a silraid driver patch for your > > kernel, maybe the latest vanilla kernel supports it, the latest > > stable 2.4.20-gentoo-r6 doesn't. > > > > Kai > > > To Get Your Own iCareHK.com Email Address? Go To www.iCareHK.com. > > -- > [EMAIL PROTECTED] mailing list -- William Kenworthy <[EMAIL PROTECTED]> -- [EMAIL PROTECTED] mailing list