Hi, Ive have the 3com (3crshpw196) and can't it to work :-(
I try the steps from: http://forums.gentoo.org/viewtopic.php?t=111987&highlight=3crshpw196 and compile my kernel without pcmcia/cardbus support but then I can't run "/etc/pcmcia start". It always say there is no pcmciadevice found in /proc If I compile my Kernel with pcmcia/cardbus support it start with following messages in syslog: Dec 9 17:50:26 p10 cardmgr[1996]: watching 1 socket Dec 9 17:50:26 p10 kernel: cs: IO port probe 0x0c00-0x0cff: clean. Dec 9 17:50:26 p10 kernel: cs: IO port probe 0x0800-0x08ff: clean. Dec 9 17:50:26 p10 kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 Dec 9 17:50:26 p10 kernel: cs: IO port probe 0x0a00-0x0aff: clean. Dec 9 17:50:26 p10 cardmgr[1996]: starting, version is 3.2.5 Dec 9 17:50:26 p10 cardmgr[1996]: socket 0: 3Com 3CRSHPW_96 Wireless LAN PC Card Dec 9 17:50:26 p10 cardmgr[1996]: executing: 'modprobe pcmf502r3' Dec 9 17:50:26 p10 kernel: pcmf502r3: ATMEL 11Mbps Wireless PCMCIA LAN driver version 1.0.0.0 Dec 9 17:50:26 p10 kernel: -> vnet_attach() Dec 9 17:50:26 p10 kernel: -> vnet_event(registration complete, 0, 0x00000001) Dec 9 17:50:26 p10 kernel: -> vnet_event(card insertion, 0, 0x00000001) Dec 9 17:50:26 p10 kernel: -> vnet_config(0x00000008) Dec 9 17:50:26 p10 kernel: pcmf502r3: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x011f Dec 9 17:50:27 p10 kernel: pcmf502r3: Registered netdevice eth1 Dec 9 17:50:27 p10 kernel: Copy Code To Internal Memory (** EEPROM **) Dec 9 17:50:27 p10 kernel: *** Downloading Firmware to internal memory *** Dec 9 17:50:27 p10 kernel: --=+>GetFwFile BasicFW : 35184, Dec 9 17:50:27 p10 kernel: Fw Mapped in : 0xC6200000 Dec 9 17:50:27 p10 kernel: <=- Out of GetFwFile Dec 9 17:50:27 p10 kernel: **** SCATTER LOADING **** Dec 9 17:50:27 p10 kernel: IFACE base = 0x508 Dec 9 17:50:27 p10 kernel: MAC Address: 00 0A 5E 1D 90 AE Dec 9 17:50:27 p10 kernel: Regulatory Domain = 0x41 Dec 9 17:50:27 p10 kernel: Adapter-REGDOMAIN!!! : 0x41 Dec 9 17:50:27 p10 kernel: Radio ON command completed with SUCCESS (0x1)... Dec 9 17:50:27 p10 kernel: Configuring WEP (Disabled-Mandatory-Open System) Dec 9 17:50:27 p10 kernel: WEP Key to use: 0 -0 Dec 9 17:50:27 p10 kernel: NO WEP Dec 9 17:50:27 p10 kernel: WE ARE INSIDE Scan... Dec 9 17:50:27 p10 kernel: Start Scanning from Channel 4 - SSID(0): Dec 9 17:50:27 p10 kernel: Scan Command in Progress... Dec 9 17:50:27 p10 cardmgr[1996]: executing: './network start eth1' Dec 9 17:50:27 p10 cardmgr[1996]: + * Could not get dependency info for "net.eth1"! Dec 9 17:50:27 p10 rc-scripts: Could not get dependency info for "net.eth1"! Dec 9 17:50:27 p10 cardmgr[1996]: + * Please run: Dec 9 17:50:27 p10 rc-scripts: Please run: Dec 9 17:50:27 p10 cardmgr[1996]: + Dec 9 17:50:27 p10 cardmgr[1996]: + * # /sbin/depscan.sh Dec 9 17:50:27 p10 rc-scripts: # /sbin/depscan.sh Dec 9 17:50:27 p10 cardmgr[1996]: + Dec 9 17:50:27 p10 cardmgr[1996]: + * to fix this. Dec 9 17:50:27 p10 rc-scripts: to fix this. Dec 9 17:50:27 p10 cardmgr[1996]: + * Could not get dependency info for "net.eth1"! Dec 9 17:50:27 p10 rc-scripts: Could not get dependency info for "net.eth1"! Dec 9 17:50:27 p10 cardmgr[1996]: + * Please run: Dec 9 17:50:27 p10 rc-scripts: Please run: Dec 9 17:50:27 p10 cardmgr[1996]: + Dec 9 17:50:27 p10 cardmgr[1996]: + * # /sbin/depscan.sh Dec 9 17:50:27 p10 rc-scripts: # /sbin/depscan.sh Dec 9 17:50:27 p10 cardmgr[1996]: + Dec 9 17:50:27 p10 cardmgr[1996]: + * to fix this. Dec 9 17:50:27 p10 rc-scripts: to fix this. Dec 9 17:50:27 p10 rc-scripts: Could not get dependency info for "net.eth1"! Dec 9 17:50:27 p10 rc-scripts: Please run: Dec 9 17:50:27 p10 rc-scripts: # /sbin/depscan.sh Dec 9 17:50:27 p10 rc-scripts: to fix this. Dec 9 17:50:27 p10 rc-scripts: Could not get dependency info for "net.eth1"! Dec 9 17:50:27 p10 rc-scripts: Please run: Dec 9 17:50:27 p10 rc-scripts: # /sbin/depscan.sh Dec 9 17:50:27 p10 rc-scripts: to fix this. Dec 9 17:50:27 p10 kernel: -> vnet_open(eth1) Dec 9 17:50:29 p10 kernel: SCAN Completed... Dec 9 17:50:29 p10 kernel: 0 Entries in BSS List: Dec 9 17:50:29 p10 kernel: Dec 9 17:50:29 p10 kernel: ---------------------------------------------------- Dec 9 17:50:29 p10 kernel: **** BSS List is empty **** Dec 9 17:50:29 p10 kernel: ---------------------------------------------------- Dec 9 17:50:29 p10 kernel: NO APs in the List... Dec 9 17:50:29 p10 kernel: No BSS found. Re-Scan Dec 9 17:50:29 p10 kernel: WE ARE INSIDE Scan... Dec 9 17:50:29 p10 kernel: Start Scanning from Channel 4 - SSID(0): Dec 9 17:50:29 p10 kernel: Scan Command in Progress... Dec 9 17:50:30 p10 kernel: F A S T SCAN Completed... Dec 9 17:50:30 p10 kernel: 0 Entries in BSS List: Dec 9 17:50:30 p10 kernel: Dec 9 17:50:30 p10 kernel: ---------------------------------------------------- Dec 9 17:50:30 p10 kernel: **** BSS List is empty **** Dec 9 17:50:30 p10 kernel: ---------------------------------------------------- Dec 9 17:50:30 p10 kernel: NO APs in the List...Dec 9 17:50:30 p10 kernel: WE ARE INSIDE Scan... Dec 9 17:50:30 p10 kernel: Start Scanning from Channel 4 - SSID(0): Dec 9 17:50:30 p10 kernel: Scan Command in Progress... Dec 9 17:50:31 p10 kernel: SCAN Completed... Dec 9 17:50:31 p10 kernel: 0 Entries in BSS List: Dec 9 17:50:31 p10 kernel: Dec 9 17:50:30 p10 kernel: No BSS found. Re-Scan ------------------------------ The last two blocks repeat every sec. :-( "iwlist eth1 ap" shows me no accespoint. Regards Manuel -- [EMAIL PROTECTED] mailing list