I have a solid piece of hardware named Compaq. It's a rack mounted machine with an astonishing P-200 processor and 4 SCSI disks. I tried with several distributions, but all failed. Finally I managed to install a debian 3.0 on it. It runs a ftp/http server. Everything is ok.
But some time ago I discovered Gentoo and I replaced my desktop distribution from RH to G1.4. I'm happy with that. I would like to have Gentoo also on the server, just to manage a single distribution. I tried several times installing it, but always failed. I also tried with the (gentoo based) Rescue CD 0.2.9 (www.sysresccd.org) which works great on other machines, but no luck. Now I don't know how to proceed. I included a part of the booting process where the SCSI driver is mentioned. Can somebody help? Regards, Goran
Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 ... Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: FX120T, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 12X CD-ROM drive, 256kB Cache Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.97.sv Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Loading I2O Core - (c) Copyright 1999 Red Hat Software I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software loop: loaded (max 8 devices) Compaq CISS Driver (v 2.4.5) HDLC support module revision 1.02 for Linux 2.4 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver, Apr 14 2002 sym53c8xx: at PCI bus 1, device 9, function 0 sym53c8xx: 53c875 detected sym53c875-0: rev 0x3 on pci bus 1 device 9 function 0 irq 10 sym53c875-0: ID 7, Fast-20, Parity Checking scsi0 : sym53c8xx-1.7.3c-20010512 sym53c875-0-<0,*>: FAST-5 WIDE SCSI 10.0 MB/s (200.0 ns, offset 15) Vendor: COMPAQ Model: ST32171W Rev: 0388 Type: Direct-Access ANSI SCSI revision: 02 DC390: 0 adapters found 3ware Storage Controller device driver for Linux v1.02.00.016. 3w-xxxx: No cards with valid units found. Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 sym53c875-0-<0,*>: FAST-5 WIDE SCSI 10.0 MB/s (200.0 ns, offset 15) SCSI device sda: 4110000 512-byte hdwr sectors (2104 MB) Partition check: sda: sda1 sda2 sda3 i2o_scsi.c: Version 0.0.1 chain_pool: 0 bytes @ c113fa80 (512 byte buffers X 4 can_queue X 0 i2o controllers) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-- [EMAIL PROTECTED] mailing list