Hi.
I'm trying to run xorg with the latest ati-drivers @ 1600x1200. When using the 'fglrx' module, all I get is a "out of sync" message from my monitor (viewsonic vp201s). Other screen resolutions can be applied but the monitor has 1600x1200 as optimal resolution (tft).
I have the correct V/H-sync lines in xorg.conf.
When I use the 'radeon' driver it works perfectly. I've also tried using the config generated by '/opt/ati/bin/fglrxconfig' with no success.
ati-drivers : 8.8.25-r1
<snip lspci>
0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
</snip lspci>
contents of /etc/X11/xorg.conf with module 'radeon' instead of 'fglrx'
<snip>
#Section "Extensions" # Option "Composite" "Enable" # EndSection
Section "Module"
# This loads the DBE extension module. Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection
# This loads the font modules Load "type1" # Load "speedo" Load "freetype" # Load "xtt"
# This loads the GLX module # Load "glx" # This loads the DRI module # Load "dri"
EndSection
# ********************************************************************** # Files section. This allows default font and rgb paths to be set # **********************************************************************
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/Type1/" # FontPath "/usr/share/fonts/CID/" FontPath "/usr/share/fonts/75dpi/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/local/" # FontPath "/usr/share/fonts/Speedo/" # FontPath "/usr/share/fonts/TrueType/" # FontPath "/usr/share/fonts/freefont/"
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# ********************************************************************** # Server flags section. # **********************************************************************
Section "ServerFlags"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. # Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom"
EndSection
# ********************************************************************** # Core keyboard's InputDevice section # **********************************************************************
Section "InputDevice"
Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "se"
EndSection
# ********************************************************************** # Core Pointer's InputDevice section # **********************************************************************
Section "InputDevice"
Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "se"
EndSection
# ********************************************************************** # Core Pointer's InputDevice section # **********************************************************************
Section "InputDevice"
Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" Option "Buttons" "5" Option "ZAxisMapping" "4 5"
EndSection
# ********************************************************************** # Monitor section # **********************************************************************
# Any number of monitor sections may be present
Section "Monitor" Identifier "ViewSonic" HorizSync 30-92 VertRefresh 50-85 Option "DPMS" EndSection
# ********************************************************************** # Graphics device section # **********************************************************************
Section "Device" Identifier "x300se" Driver "radeon" #VideoRam 131072 # Insert Clocks lines here if appropriate EndSection
# ********************************************************************** # Screen sections # **********************************************************************
Section "Screen" Identifier "Screen1" Device "x300se" Monitor "ViewSonic" DefaultDepth 24 Subsection "Display" Depth 24 Modes "1600x1200" ViewPort 0 0 EndSubsection EndSection
# ********************************************************************** # ServerLayout sections. # **********************************************************************
Section "ServerLayout"
Identifier "Simple Layout" Screen "Screen1" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "DRI" Mode 0666 EndSection
</snip>
-- gentoo-user@gentoo.org mailing list