On Thursday 29 May 2014 07:27:24 Mick wrote: > On Thursday 29 May 2014 00:05:16 William Kenworthy wrote: > > On 29/05/14 06:28, Mick wrote: > > > On Wednesday 28 May 2014 20:02:29 Samuli Suominen wrote: > > >> On 28/05/14 21:42, Mick wrote: > > >>> Hmm ... am I alone in this quest? > > >> > > >> See here, http://bugs.gentoo.org/show_bug.cgi?id=505362 > > > > > > Thanks! I missed this bug when I glanced earlier. However, it does > > > not mention rfcomm is now missing, or the fact that the gentoo rc > > > script fails to initialise bluethooth and complains about rfcomm > > > service not having started/exist, or that bluetoothctl now does not > > > work at all. Is all this down to a missing udev rule? > > > > No its the fact that bluez 5 has been redesigned to fit in more with the > > systemd world. > > I see. No systemd here, other than systemd's udev. > > > it works if: > > > > remove rfcomm using rc-update > > I didn't have to remove it because it wasn't there ... no rfcomm service > anymore, or any /etc/conf.d/rfcomm file. There is a /etc/conf.d/bluetooth > showing: > ============================================================ > # Bluetooth configuraton file > > # Bind rfcomm devices (allowed values are "true" and "false") > RFCOMM_ENABLE=true > > # Config file for rfcomm > RFCOMM_CONFIG="/etc/bluetooth/rfcomm.conf" > ============================================================ > > > /etc/init.d/bluetoothctl restart (get rid of any existing config) > > Ahh! I have no /etc/init.d/bluetoothctl service, only > /etc/init.d/bluetooth > > Am I missing some package for it? Interestingly the module bt_rfcomm was > not initialised by udev and I had to modprobe it manually ... > > # lsmod | grep bt > btusb 14115 0 > bluetooth 173578 5 btusb,rfcomm > > > bluetoothctl > > power on > > scan on > > agent on > > default-agent > > trust [MAC ADDRESS OF CLIENT] > > pair [MAC ADDRESS OF CLIENT] > > enter PIN when requested > > wait for "Connected: no" > > exit > > Unfortunately, none of the above works anymore for me: > > [bluetooth]# power on > No default controller available > [bluetooth]# scan on > No default controller available > [bluetooth]# agent on > Agent registration enabled > [bluetooth]# default-agent > No agent is registered > [bluetooth]# > > > After this you should have an rfcomm channel available to the client. I > > have the above in an expect script as bluetoothctl has no inate remote > > controllability capabilities. No separate pairing app or rfcomm init > > script needed. > > I do not get a /dev/rfcommX, unless I manually set it up like so: > > # rfcomm bind rfcomm0 hci0 > # ls -la /dev/rfcomm* > crw-rw---- 1 root uucp 216, 0 May 29 07:06 /dev/rfcomm0 > > and hci0 will not come up unless I start it with hciconfig. Despite all > this manual intervention bluetooth does not have access or use the rfcomm > device, although 'hcitool scan' and 'sdptool browse' return results from > my mobile phone. > > Please note I have not used the previous patch you have posted on the list. > > These are the BT modules in my 3.12.20-gentoo kernel: > > $ grep -i BT /usr/src/linux/.config > CONFIG_BT=m > CONFIG_BT_RFCOMM=m > CONFIG_BT_RFCOMM_TTY=y > CONFIG_BT_BNEP=m > CONFIG_BT_BNEP_MC_FILTER=y > CONFIG_BT_BNEP_PROTO_FILTER=y > CONFIG_BT_HIDP=m > CONFIG_BT_HCIBTUSB=m > CONFIG_BT_HCIBTSDIO=m > # CONFIG_BT_HCIUART is not set > CONFIG_BT_HCIBCM203X=m > # CONFIG_BT_HCIBPA10X is not set > # CONFIG_BT_HCIBFUSB is not set > # CONFIG_BT_HCIDTL1 is not set > # CONFIG_BT_HCIBT3C is not set > # CONFIG_BT_HCIBLUECARD is not set > # CONFIG_BT_HCIBTUART is not set > # CONFIG_BT_HCIVHCI is not set > # CONFIG_BT_MRVL is not set > # CONFIG_BT_ATH3K is not set > CONFIG_MAC_EMUMOUSEBTN=y > # CONFIG_INPUT_ATLAS_BTNS is not set > # CONFIG_VIDEO_USBTV is not set > # CONFIG_SND_BT87X is not set > # CONFIG_USB_BTMTK is not set > # CONFIG_TOSHIBA_BT_RFKILL is not set > # CONFIG_BTRFS_FS is not set > # CONFIG_RBTREE_TEST is not set > CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y > > and I don't recall changing any of them since the good ol' bluez-4 days.
Hmm... also noticed that BT_HCIBCM203X is not loaded either. This is what
dmesg shows:
=========================================================================
...
[ 2.778306] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[ 2.795308] hub 2-1:1.0: port 6 not reset yet, waiting 10ms
[ 2.844701] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id:
0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 579772
[ 2.870246] usb 2-1.6: ep0 maxpacket = 8
[ 2.873102] usb 2-1.6: default language 0x0409
[ 2.873610] usb 2-1.6: udev 3, busnum 2, minor = 130
[ 2.873617] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=4500
[ 2.879698] usb 2-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.884038] usb 2-1.6: Product: BCM2046B1
[ 2.888341] usb 2-1.6: Manufacturer: Broadcom
[ 2.891237] usb 2-1.6: usb_probe_device
[ 2.891244] usb 2-1.6: configuration #1 chosen from 1 choice
[ 2.891354] usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0)
[ 2.891398] hub 2-1.6:1.0: usb_probe_interface
[ 2.891403] hub 2-1.6:1.0: usb_probe_interface - got id
[ 2.891409] hub 2-1.6:1.0: USB hub found
[ 2.894104] hub 2-1.6:1.0: 3 ports detected
[ 2.896322] hub 2-1.6:1.0: compound device; port removable status: FFF
[ 2.896325] hub 2-1.6:1.0: ganged power switching
[ 2.896327] hub 2-1.6:1.0: global over-current protection
[ 2.896329] hub 2-1.6:1.0: power on to power good time: 100ms
[ 2.896606] hub 2-1.6:1.0: local power source is good
[ 2.896611] hub 2-1.6:1.0: no over-current condition exists
[ 2.896687] hub 2-1.6:1.0: enabling power on all ports
[snip ...]
[ 9.117034] Bluetooth: Core ver 2.16
[ 9.117051] NET: Registered protocol family 31
[ 9.117053] Bluetooth: HCI device and connection manager initialized
[ 9.117058] Bluetooth: HCI socket layer initialized
[ 9.117061] Bluetooth: L2CAP socket layer initialized
[ 9.117067] Bluetooth: SCO socket layer initialized
[ 9.189459] cfg80211: World regulatory domain updated:
[ 9.189460] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 9.189462] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.189463] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.189465] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi,
2000 mBm)
[ 9.189466] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.189467] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi,
2000 mBm)
[ 9.229696] btusb 2-1.6.3:1.0: usb_probe_interface
[ 9.229699] btusb 2-1.6.3:1.0: usb_probe_interface - got id
[ 9.230158] btusb 2-1.6.3:1.2: usb_probe_interface
[ 9.230164] btusb 2-1.6.3:1.2: usb_probe_interface - got id
[ 9.230178] btusb 2-1.6.3:1.3: usb_probe_interface
[ 9.230182] btusb 2-1.6.3:1.3: usb_probe_interface - got id
[ 9.230211] usbcore: registered new interface driver btusb
[ 9.230410] usb 2-1.6.3: link qh1-3008/ffff8801325a7c00 start 0 [1/2 us]
[ 9.346066] input: HDA Intel MID Headphone Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
=========================================================================
So it picks up and loads btusb, but not bcm203x, or rfcomm. Is my kernel
config wrong?
This is the device in question:
==============================
Bus 002 Device 006: ID 413c:8156 Dell Computer Corp. Wireless 370 Bluetooth
Mini-card
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x413c Dell Computer Corp.
idProduct 0x8156 Wireless 370 Bluetooth Mini-card
bcdDevice 4.56
iManufacturer 1 Dell Computer Corp
iProduct 2 Dell Wireless 370 Bluetooth Mini-card
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 216
bNumInterfaces 4
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0020 1x 32 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 254 Application Specific Interface
bInterfaceSubClass 1 Device Firmware Update
bInterfaceProtocol 0
iInterface 0
Device Firmware Upgrade Interface Descriptor:
bLength 7
bDescriptorType 33
bmAttributes 7
Will Not Detach
Manifestation Tolerant
Upload Supported
Download Supported
wDetachTimeout 5000 milliseconds
wTransferSize 64 bytes
Device Status: 0x0001
Self Powered
==============================
--
Regards,
Mick
signature.asc
Description: This is a digitally signed message part.
