On 6/30/23 13:03, the...@sys-concept.com wrote:
I have a motherboard that I think is using incorrect network driver.
lspci -knn |grep net -A 4
04:00.0 Ethernet controller [0200]: Intel Corporation I211 Gigabit Network
Connection [8086:1539] (rev 03)
Subsystem: ASUSTeK Computer Inc. I211 Gigabit Network Connection
[1043:85f0]
Kernel driver in use: igb
The network speed on the switch is only 10Mbs or 100Mbs (orange light)
What kernel driver should I use with this network adapter?
That "igb" driver is does not give me 1Gb network speed.
ehtool show I have 1000Mb speed connection but network light on the switch is
orange (not green).
ethtool enp4s0
Settings for enp4s0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: on
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
MDI-X: off (auto)
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes