> >>>>> What -march and CHOST settings would you guys use for a CPU that shows > >>>>> up like this in cpuinfo: > >>>>> > >>>>> Intel Pentium Dual CPU T2310 @ 1.46Ghz > >>>>> > >>>>> > >>>>> > >>>> I'd use "prescott" for this one, as you're using x86 CHOST anyway. > >>>> > >>>> > >>>> > >>>>> Does this CPU have 64-bit extensions? > >>>>> > >>>>> > >>>>> > >>>> I believe it does, check the flags at /proc/cpuinfo to be sure. > >>>> "nocona" would be my choice if possible to create a 64 bits system. > >>>> > >>>> > >>> Alright, I'll give nocona a try. Should I be using > >>> CHOST="x86_64-pc-linux-gnu"? And the processor family in the kernel > >>> should be "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"? > >>> > >>> > >> I wouldn't use x86_64-pc-linux-gnu unless you want to break your system. > >> Unless you are starting from scratch 64 bit. > >> > > > > Is there any way to switch to that CHOST after I've already installed > > a stage3? If I do get this working with 64 bits, will I be using > > amd64 packages even though it's not an AMD system, or would I still be > > x86? > > > > - Grant > > > Have you already installed a 32bit stage3? If so there is no way to > switch except for a reinstall. AMD64 is for both AMD and Intel 64 bit.
If you click "View processor number details" here: http://www.intel.com/cd/products/services/emea/eng/processors/pentium_dual-core/340988.htm it is clearly a 64 bit CPU. Do-over. - Grant -- [EMAIL PROTECTED] mailing list
