> >>> What -march and CHOST settings would you guys use for a CPU that shows > >>> up like this in cpuinfo: > >>> > >>> Intel Pentium Dual CPU T2310 @ 1.46Ghz > >>> > >>> > >> I'd use "prescott" for this one, as you're using x86 CHOST anyway. > >> > >> > >>> Does this CPU have 64-bit extensions? > >>> > >>> > >> I believe it does, check the flags at /proc/cpuinfo to be sure. > >> "nocona" would be my choice if possible to create a 64 bits system. > >> > > > > Alright, I'll give nocona a try. Should I be using > > CHOST="x86_64-pc-linux-gnu"? And the processor family in the kernel > > should be "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"? > > > I wouldn't use x86_64-pc-linux-gnu unless you want to break your system. > Unless you are starting from scratch 64 bit.
Is there any way to switch to that CHOST after I've already installed a stage3? If I do get this working with 64 bits, will I be using amd64 packages even though it's not an AMD system, or would I still be x86? - Grant -- [EMAIL PROTECTED] mailing list