Ms. Aswathy S wrote:
Hi Justin,
Thanks for the reply.
Once again i tried to minimize the protein +ligand in vacuum. Also tried by
varying the maximum force constant. But that too converged at the 15 th step
(or lesser steps based on the Fmax). The em.mdp file i have attached here
with. Please go through that once please and tell me because of any of these
parameters, the system behaves odd??.
As I said before, it is not the step that matters, it is whether or not the
system converges within your criteria. I am assuming EM is working, based on
the fact that the process converges differently depending on different target
values for Fmax. Your .mdp file looks reasonable.
If we can clarify for a moment - several messages ago you claimed that you were
doing a 20-ps NVT equilibration that was finishing at 15 steps, but that appears
to not be the case. Is it the NVT step that is failing to complete? Is ngmx
failing to display the NVT trajectory, and did gmxcheck report problems with the
.edr file?
I think you are correct that the itp file created by PRODRG need corrections.
But how can I chek that is that the problem with that file or how can i
rectify?
Parameterization is very difficult. Prepare for a lot of advanced work. Please
see here:
http://oldwiki.gromacs.org/index.php/Parameterization
-Justin
Dept. Biotechnology Ext. 3108
----- Original Message ----- From: "Justin A. Lemkul" <jalem...@vt.edu> To:
"Discussion list for GROMACS users" <gmx-users@gromacs.org> Sent: Sunday,
June 14, 2009 10:51:30 PM GMT +05:30 Chennai, Kolkata, Mumbai, New Delhi
Subject: Re: [gmx-users] problem in ngmx
Ms. Aswathy S wrote:
Hi Justin,
I tried maximum to find out the problem but i failed in that.
I will give you the detailed steps..Kindly check once and tell me where is
the problem. As you suggested now i am trying in gromacs 4.0.4 . 1. The
ligand topology file is generated in PRODRG beta server using the GROMOS
96.1 force field. 2. The protein toplogy file using gromos 96 43 a1 force
field 3. Tried to minimize in vacuum (Please find the em.mdp file). But the
cycle finished at 15 steps. But in some previous post I saw that its not
an error so I went ahead with genbox and further minimization. But ended in
the same 15 th steps. also checked the gmxcheck for the files as you
suggested it show the following error.
What is most important is not the number of steps necessarily, but that the
potential energy converged to an appropriate value and you reached an Fmax
below your target.
Realize that using a topology straight from PRODRG is often not the best
course. The charges and charge groups assigned by PRODRG often require manual
modification and verification of the parameters. This could be a source of
problem.
It may be that there is some kind of bug, but before that can be proposed,
you have to demonstrate that the preparation steps were successful (i.e., EM
criteria of potential energy and Fmax).
-Justin
'', 33685 atoms Last frame 0 time 1.000
Both files read correctly Checking energy file 1RBP_water_min.edr
------------------------------------------------------- Program gmxcheck,
VERSION 4.0.4 Source code file: enxio.c, line: 283
Fatal error: Energy file 1RBP_water_min.edr not recognized, maybe different
CPU? -------------------------------------------------------
"I Do It All the Time" (Magnapop)
Am I doing any mistake in the steps???? Please find some time to help me.
Thank you very much, Aswathy Dept. Biotechnology Ext. 3108
----- Original Message ----- From: "Justin A. Lemkul" <jalem...@vt.edu> To:
"Discussion list for GROMACS users" <gmx-users@gromacs.org> Sent:
Saturday, June 13, 2009 6:23:04 PM GMT +05:30 Chennai, Kolkata, Mumbai, New
Delhi Subject: Re: [gmx-users] problem in ngmx
Ms. Aswathy S wrote:
Thank you very much for the reply...
gmxcheck of my out shows a "segementation fault" in the last part. What
could be the problem??
this is the last part of the output
x[31416] (-7.37978e-03 6.79718e+00 6.07531e+00) - (-7.40000e-03
6.79720e+00 6.07530e+00) x[31428] ( 2.35365e-01 -6.53947e-03
5.65519e+00) - ( 2.35400e-01 -6.50000e-03 5.65520e+00) x[31478] (
1.54478e-02 6.14019e+00 5.74537e+00) - ( 1.54000e-02 6.14020e+00
5.74540e+00) Segmentation fault
The energy minimisation & the equilibration steps are finished at 15 step
eventhough it was given for 20 ps(10000 steps).But the output
coordinates file doesnt show any abnornmality as i checked in the viewer?
My equilibration step was in NVT.
whether nothing is happening or any other problem?
If you got 15 steps when you expected 10000, it seems pretty clear to me
that something crashed very early on in your simulation.
-Justin
Thanks & regards, Aswathy
Dept. Biotechnology Ext. 3108
----- Original Message ----- From: "Manik Mayur" <manik.ma...@gmail.com>
To: "Discussion list for GROMACS users" <gmx-users@gromacs.org>,
jalem...@vt.edu Sent: Saturday, June 13, 2009 5:34:08 PM GMT +05:30
Chennai, Kolkata, Mumbai, New Delhi Subject: Re: [gmx-users] problem in
ngmx
On Sat, Jun 13, 2009 at 5:14 PM, Florian Dommert <
domm...@icp.uni-stuttgart.de > wrote:
* Justin A. Lemkul < jalem...@vt.edu > [2009-06-13 07:31:17 -0400]:
Ms. Aswathy S wrote:
Hi,
after equlibration of my protein and ligand I tried to create the energy
file ans well as the to display the trajectories using ngmx option,. But
it shows the follo: error,
Xlib: connection to ":0.0" refused by server Xlib: No protocol specified
Can't connect to X Server. Check your DISPLAY environment variable
Seems like your X environment is somehow not properly configured.
If you are working through ssh, then you can :
$export DISPLAY=<your current computer's ip>:0.0
Or you are tunneling through a SSH connection. There are several
possiblities:
1. Try ssh -X to login, this could solve the problem, if you are in
principle allowed to use X11 tunneling. 2. In case this does not work
either it can be that you are not allowed to tunnel X11.
However take care that you also need a properly configured XServer
running on your own system not just on the host you login. So in case you
use Windows or MacOS make sure this is the case.
Flo
************************************************
also the g_energy command shows that ,
Program g_energy_mpi, VERSION 3.3.3 Source code file: enxio.c, line: 239
Fatal error: Energy file eq_2ps_ener.edr not recognized, maybe different
CPU?
What does gmxcheck tell you about the file. Perhaps it has been corrupted
in some way.
Also, you may want to work with a more current version (4.0.5) to utilize
the newest features and bug fixes.
-Justin
Can any one help me, please???
Thanks, Aswathy ASBT Dept. Biotechnology Ext. 3108
_______________________________________________ gmx-users mailing list
gmx-users@gromacs.org http://lists.gromacs.org/mailman/listinfo/gmx-users
Please search the archive at http://www.gromacs.org/search before
posting! Please don't post (un)subscribe requests to the list. Use the
www interface or send it to gmx-users-requ...@gromacs.org . Can't post?
Read http://www.gromacs.org/mailing_lists/users.php
------------------------------------------------------------------------
_______________________________________________ gmx-users mailing list
gmx-users@gromacs.org http://lists.gromacs.org/mailman/listinfo/gmx-users
Please search the archive at http://www.gromacs.org/search before posting!
Please don't post (un)subscribe requests to the list. Use the www interface
or send it to gmx-users-requ...@gromacs.org. Can't post? Read
http://www.gromacs.org/mailing_lists/users.php
--
========================================
Justin A. Lemkul
Ph.D. Candidate
ICTAS Doctoral Scholar
Department of Biochemistry
Virginia Tech
Blacksburg, VA
jalemkul[at]vt.edu | (540) 231-9080
http://www.bevanlab.biochem.vt.edu/Pages/Personal/justin
========================================
_______________________________________________
gmx-users mailing list gmx-users@gromacs.org
http://lists.gromacs.org/mailman/listinfo/gmx-users
Please search the archive at http://www.gromacs.org/search before posting!
Please don't post (un)subscribe requests to the list. Use the
www interface or send it to gmx-users-requ...@gromacs.org.
Can't post? Read http://www.gromacs.org/mailing_lists/users.php
