Hongbing Hu wrote: > Ok, attachment inclueds all the things > > Please be careful!
I installed this on a yeeloong using linux 2.6.27.1 - I think the README needs to be fixed, it refers to the "ec_misc" module, whereas the module names seems to be actually named "ec_miscd". It seems to have installed fine: loongson2f-1:~# cat /proc/cmdline console=tty root=/dev/hda1 resume=/dev/hda5 no_auto_cmd rootdelay=8 machtype=8.9 PMON_VER=LM8089-1.4.3 EC_VER=PQ1D28 rd_start=0x84000000 rd_size=0x2af778 However the backlight still does not go off when the lid is closed. Maybe there is some parameter that also needs to be set in PMON for this to work / be turned on? Also on this box I had previously set the fan to manually be on highest speed from PMON using the instructions at http://gnewsense.pastebin.com/f32f338b (also below) - could that be causing a problem? turning fan on on a yeeloong via pmon 2000 when in pmon using :(rdecreg addr size(can be a group of addr), wrecreg addr val(only 1 addr)) wrecreg f459 1 // setting the fan manual control mode wrecreg f4d2 1 // switch fan wrecreg f4cc 2 // you can setting 1, 2,3 for fan speed stage 1, 2, 3. here is stage2 for eg. you can get the status of fan from : rdecreg f4da 1 // read one reg from f4da : '0' for stop, '1' for running. Thanks, -- Daniel JB Clark | Sys Admin, Free Software Foundation pobox.com/~dclark | http://www.fsf.org/about/staff#danny _______________________________________________ gNewSense-dev mailing list gNewSense-dev@nongnu.org http://lists.nongnu.org/mailman/listinfo/gnewsense-dev